✏️ Editing: calling_methods.rdoc Read Only

= Calling Methods

Calling a method sends a message to an object so it can perform some work.

In ruby you send a message to an object like this:

my_method()

Note that the parenthesis are optional:

my_method

Except when there is difference between using and omitting parentheses, this
document uses parenthesis when arguments are present to avoid confusion.

This section only covers calling methods.  See also the {syntax documentation
on defining methods}[rdoc-ref:syntax/methods.rdoc].

== Receiver

+self+ is the default receiver.  If you don't specify any receiver +self+ will
be used.  To specify a receiver use <code>.</code>:

my_object.my_method

This sends the +my_method+ message to +my_object+.  Any object can be a
receiver but depending on the method's visibility sending a message may raise a
NoMethodError.

You may also use <code>::</code> to designate a receiver, but this is rarely
used due to the potential for confusion with <code>::</code> for namespaces.

=== Chaining \Method Calls

You can "chain" method calls by immediately following one method call with another.

This example chains methods Array#append and Array#compact:

a = [:foo, 'bar', 2]
  a1 = [:baz, nil, :bam, nil]
  a2 = a.append(*a1).compact
  a2 # => [:foo, "bar", 2, :baz, :bam]

Details:

- First method <tt>merge</tt> creates a copy of <tt>a</tt>,
  appends (separately) each element of <tt>a1</tt> to the copy, and returns
    [:foo, "bar", 2, :baz, nil, :bam, nil]
- Chained method <tt>compact</tt> creates a copy of that return value,
  removes its <tt>nil</tt>-valued entries, and returns
     [:foo, "bar", 2, :baz, :bam]

You can chain methods that are in different classes.
This example chains methods Hash#to_a and Array#reverse:

h = {foo: 0, bar: 1, baz: 2}
  h.to_a.reverse # => [[:baz, 2], [:bar, 1], [:foo, 0]]

Details:

- First method Hash#to_a converts <tt>a</tt> to an \Array, and returns
    [[:foo, 0], [:bar, 1], [:baz, 2]]
- Chained method Array#reverse creates copy of that return value,
  reverses it, and  returns
    [[:baz, 2], [:bar, 1], [:foo, 0]]

=== Safe Navigation Operator

<code>&.</code>, called "safe navigation operator", allows to skip method call
when receiver is +nil+. It returns +nil+ and doesn't evaluate method's arguments
if the call is skipped.

REGEX = /(ruby) is (\w+)/i
  "Ruby is awesome!".match(REGEX).values_at(1, 2)
  # => ["Ruby", "awesome"]
  "Python is fascinating!".match(REGEX).values_at(1, 2)
  # NoMethodError: undefined method `values_at' for nil:NilClass
  "Python is fascinating!".match(REGEX)&.values_at(1, 2)
  # => nil

This allows to easily chain methods which could return empty value. Note that
<code>&.</code> skips only one next call, so for a longer chain it is necessary
to add operator on each level:

"Python is fascinating!".match(REGEX)&.values_at(1, 2).join(' - ')
  # NoMethodError: undefined method `join' for nil:NilClass
  "Python is fascinating!".match(REGEX)&.values_at(1, 2)&.join(' - ')
  # => nil

== Arguments

There are three types of arguments when sending a message, the positional
arguments, keyword (or named) arguments and the block argument.  Each message
sent may use one, two or all types of arguments, but the arguments must be
supplied in this order.

All arguments in ruby are passed by reference and are not lazily evaluated.

Each argument is separated by a <code>,</code>:

my_method(1, '2', :three)

Arguments may be an expression, a hash argument:

'key' => value

or a keyword argument:

key: value

Hash and keyword arguments must be contiguous and must appear after all
positional arguments, but may be mixed:

my_method('a' => 1, b: 2, 'c' => 3)

=== Positional Arguments

The positional arguments for the message follow the method name:

my_method(argument1, argument2)

In many cases, parenthesis are not necessary when sending a message:

my_method argument1, argument2

However, parenthesis are necessary to avoid ambiguity.  This will raise a
SyntaxError because ruby does not know which method argument3 should be sent
to:

method_one argument1, method_two argument2, argument3

If the method definition has a <code>*argument</code> extra positional
arguments will be assigned to +argument+ in the method as an Array.

If the method definition doesn't include keyword arguments, the keyword or
hash-type arguments are assigned as a single hash to the last argument:

def my_method(options)
    p options
  end

my_method('a' => 1, b: 2) # prints: {'a'=>1, :b=>2}

If too many positional arguments are given, an ArgumentError is raised.

=== Default Positional Arguments

When the method defines default arguments you do not need to supply all the
arguments to the method.  Ruby will fill in the missing arguments in-order.

First we'll cover the simple case where the default arguments appear on the
right.  Consider this method:

def my_method(a, b, c = 3, d = 4)
    p [a, b, c, d]
  end

Here +c+ and +d+ have default values which ruby will apply for you.  If you
send only two arguments to this method:

my_method(1, 2)

You will see ruby print <code>[1, 2, 3, 4]</code>.

If you send three arguments:

my_method(1, 2, 5)

You will see ruby print <code>[1, 2, 5, 4]</code>

Ruby fills in the missing arguments from left to right.

Ruby allows default values to appear in the middle of positional arguments.
Consider this more complicated method:

def my_method(a, b = 2, c = 3, d)
    p [a, b, c, d]
  end

Here +b+ and +c+ have default values.  If you send only two arguments to this
method:

my_method(1, 4)

You will see ruby print <code>[1, 2, 3, 4]</code>.

If you send three arguments:

my_method(1, 5, 6)

You will see ruby print <code>[1, 5, 3, 6]</code>.

Describing this in words gets complicated and confusing. I'll describe it
in variables and values instead.

First <code>1</code> is assigned to +a+, then <code>6</code> is assigned to
+d+.  This leaves only the arguments with default values.  Since
<code>5</code> has not been assigned to a value yet, it is given to +b+ and
+c+ uses its default value of <code>3</code>.

=== Keyword Arguments

Keyword arguments follow any positional arguments and are separated by commas
like positional arguments:

my_method(positional1, keyword1: value1, keyword2: value2)

Any keyword arguments not given will use the default value from the method
definition.  If a keyword argument is given that the method did not list,
and the method definition does not accept arbitrary keyword arguments, an
ArgumentError will be raised.

Keyword argument value can be omitted, meaning the value will be be fetched
from the context by the name of the key

keyword1 = 'some value'
  my_method(positional1, keyword1:)
  # ...is the same as
  my_method(positional1, keyword1: keyword1)

Be aware that when method parenthesis are omitted, too, the parsing order might
be unexpected:

my_method positional1, keyword1:

some_other_expression

# ...is actually parsed as
  my_method(positional1, keyword1: some_other_expression)

=== Block Argument

The block argument sends a closure from the calling scope to the method.

The block argument is always last when sending a message to a method.  A block
is sent to a method using <code>do ... end</code> or <code>{ ... }</code>:

my_method do
    # ...
  end

or:

my_method {
    # ...
  }

<code>do end</code> has lower precedence than <code>{ }</code> so:

method_1 method_2 {
    # ...
  }

Sends the block to +method_2+ while:

method_1 method_2 do
    # ...
  end

Sends the block to +method_1+.  Note that in the first case if parentheses are
used the block is sent to +method_1+.

A block will accept arguments from the method it was sent to.  Arguments are
defined similar to the way a method defines arguments.  The block's arguments
go in <code>| ... |</code> following the opening <code>do</code> or
<code>{</code>:

my_method do |argument1, argument2|
    # ...
  end

==== Block Local Arguments

You may also declare block-local arguments to a block using <code>;</code> in
the block arguments list.  Assigning to a block-local argument will not
override local arguments outside the block in the caller's scope:

def my_method
    yield self
  end

place = "world"

my_method do |obj; place|
    place = "block"
    puts "hello #{obj} this is #{place}"
  end

puts "place is: #{place}"

This prints:

hello main this is block
  place is world

So the +place+ variable in the block is not the same +place+ variable as
outside the block.  Removing <code>; place</code> from the block arguments
gives this result:

hello main this is block
  place is block

=== Array to Arguments Conversion

Given the following method:

def my_method(argument1, argument2, argument3)
  end

You can turn an Array into an argument list with <code>*</code> (or splat)
operator:

arguments = [1, 2, 3]
  my_method(*arguments)

or:

arguments = [2, 3]
  my_method(1, *arguments)

Both are equivalent to:

my_method(1, 2, 3)

You may also use the <code>**</code> (described next) to convert a Hash into
keyword arguments.

If the number of objects in the Array do not match the number of arguments for
the method, an ArgumentError will be raised.

If the splat operator comes first in the call, parentheses must be used to
avoid a warning:

my_method *arguments  # warning
  my_method(*arguments) # no warning

=== Hash to Keyword Arguments Conversion

Given the following method:

def my_method(first: 1, second: 2, third: 3)
  end

You can turn a Hash into keyword arguments with the <code>**</code>
(keyword splat) operator:

arguments = { first: 3, second: 4, third: 5 }
  my_method(**arguments)

or:

arguments = { first: 3, second: 4 }
  my_method(third: 5, **arguments)

Both are equivalent to:

my_method(first: 3, second: 4, third: 5)

If the method definition uses the keyword splat operator to
gather arbitrary keyword arguments, they will not be gathered
by <code>*</code>:

def my_method(*a, **kw)
    p arguments: a, keywords: kw
  end

my_method(1, 2, '3' => 4, five: 6)

Prints:

{:arguments=>[1, 2], :keywords=>{'3'=>4, :five=>6}}

=== Proc to Block Conversion

Given a method that use a block:

def my_method
    yield self
  end

You can convert a proc or lambda to a block argument with the <code>&</code>
(block conversion) operator:

argument = proc { |a| puts "#{a.inspect} was yielded" }

my_method(&argument)

If the block conversion operator comes first in the call, parenthesis must be
used to avoid a warning:

my_method &argument  # warning
  my_method(&argument) # no warning

== Method Lookup

When you send a message, Ruby looks up the method that matches the name of the
message for the receiver.  Methods are stored in classes and modules so method
lookup walks these, not the objects themselves.

Here is the order of method lookup for the receiver's class or module +R+:

* The prepended modules of +R+ in reverse order
* For a matching method in +R+
* The included modules of +R+ in reverse order

If +R+ is a class with a superclass, this is repeated with +R+'s superclass
until a method is found.

Once a match is found method lookup stops.

If no match is found this repeats from the beginning, but looking for
+method_missing+.  The default +method_missing+ is BasicObject#method_missing
which raises a NameError when invoked.

If refinements (an experimental feature) are active, the method lookup changes.
See the {refinements documentation}[rdoc-ref:syntax/refinements.rdoc] for
details.

✏️ Editing: calling_methods.rdoc Read Only

= Calling Methods

Calling a method sends a message to an object so it can perform some work.

In ruby you send a message to an object like this:

my_method()

Note that the parenthesis are optional:

my_method

Except when there is difference between using and omitting parentheses, this
document uses parenthesis when arguments are present to avoid confusion.

This section only covers calling methods.  See also the {syntax documentation
on defining methods}[rdoc-ref:syntax/methods.rdoc].

== Receiver

+self+ is the default receiver.  If you don't specify any receiver +self+ will
be used.  To specify a receiver use <code>.</code>:

my_object.my_method

This sends the +my_method+ message to +my_object+.  Any object can be a
receiver but depending on the method's visibility sending a message may raise a
NoMethodError.

You may also use <code>::</code> to designate a receiver, but this is rarely
used due to the potential for confusion with <code>::</code> for namespaces.

=== Chaining \Method Calls

You can "chain" method calls by immediately following one method call with another.

This example chains methods Array#append and Array#compact:

a = [:foo, 'bar', 2]
  a1 = [:baz, nil, :bam, nil]
  a2 = a.append(*a1).compact
  a2 # => [:foo, "bar", 2, :baz, :bam]

Details:

You can chain methods that are in different classes.
This example chains methods Hash#to_a and Array#reverse:

h = {foo: 0, bar: 1, baz: 2}
  h.to_a.reverse # => [[:baz, 2], [:bar, 1], [:foo, 0]]

Details:

=== Safe Navigation Operator

<code>&.</code>, called "safe navigation operator", allows to skip method call
when receiver is +nil+. It returns +nil+ and doesn't evaluate method's arguments
if the call is skipped.

This allows to easily chain methods which could return empty value. Note that
<code>&.</code> skips only one next call, so for a longer chain it is necessary
to add operator on each level:

== Arguments

All arguments in ruby are passed by reference and are not lazily evaluated.

Each argument is separated by a <code>,</code>:

my_method(1, '2', :three)

Arguments may be an expression, a hash argument:

'key' => value

or a keyword argument:

key: value

Hash and keyword arguments must be contiguous and must appear after all
positional arguments, but may be mixed:

my_method('a' => 1, b: 2, 'c' => 3)

=== Positional Arguments

The positional arguments for the message follow the method name:

my_method(argument1, argument2)

In many cases, parenthesis are not necessary when sending a message:

my_method argument1, argument2

However, parenthesis are necessary to avoid ambiguity.  This will raise a
SyntaxError because ruby does not know which method argument3 should be sent
to:

method_one argument1, method_two argument2, argument3

If the method definition has a <code>*argument</code> extra positional
arguments will be assigned to +argument+ in the method as an Array.

If the method definition doesn't include keyword arguments, the keyword or
hash-type arguments are assigned as a single hash to the last argument:

def my_method(options)
    p options
  end

my_method('a' => 1, b: 2) # prints: {'a'=>1, :b=>2}

If too many positional arguments are given, an ArgumentError is raised.

=== Default Positional Arguments

When the method defines default arguments you do not need to supply all the
arguments to the method.  Ruby will fill in the missing arguments in-order.

First we'll cover the simple case where the default arguments appear on the
right.  Consider this method:

def my_method(a, b, c = 3, d = 4)
    p [a, b, c, d]
  end

Here +c+ and +d+ have default values which ruby will apply for you.  If you
send only two arguments to this method:

my_method(1, 2)

You will see ruby print <code>[1, 2, 3, 4]</code>.

If you send three arguments:

my_method(1, 2, 5)

You will see ruby print <code>[1, 2, 5, 4]</code>

Ruby fills in the missing arguments from left to right.

Ruby allows default values to appear in the middle of positional arguments.
Consider this more complicated method:

def my_method(a, b = 2, c = 3, d)
    p [a, b, c, d]
  end

Here +b+ and +c+ have default values.  If you send only two arguments to this
method:

my_method(1, 4)

You will see ruby print <code>[1, 2, 3, 4]</code>.

If you send three arguments:

my_method(1, 5, 6)

You will see ruby print <code>[1, 5, 3, 6]</code>.

Describing this in words gets complicated and confusing. I'll describe it
in variables and values instead.

=== Keyword Arguments

Keyword arguments follow any positional arguments and are separated by commas
like positional arguments:

my_method(positional1, keyword1: value1, keyword2: value2)

Keyword argument value can be omitted, meaning the value will be be fetched
from the context by the name of the key

keyword1 = 'some value'
  my_method(positional1, keyword1:)
  # ...is the same as
  my_method(positional1, keyword1: keyword1)

Be aware that when method parenthesis are omitted, too, the parsing order might
be unexpected:

my_method positional1, keyword1:

some_other_expression

# ...is actually parsed as
  my_method(positional1, keyword1: some_other_expression)

=== Block Argument

The block argument sends a closure from the calling scope to the method.

The block argument is always last when sending a message to a method.  A block
is sent to a method using <code>do ... end</code> or <code>{ ... }</code>:

my_method do
    # ...
  end

or:

my_method {
    # ...
  }

<code>do end</code> has lower precedence than <code>{ }</code> so:

method_1 method_2 {
    # ...
  }

Sends the block to +method_2+ while:

method_1 method_2 do
    # ...
  end

Sends the block to +method_1+.  Note that in the first case if parentheses are
used the block is sent to +method_1+.

my_method do |argument1, argument2|
    # ...
  end

==== Block Local Arguments

def my_method
    yield self
  end

place = "world"

my_method do |obj; place|
    place = "block"
    puts "hello #{obj} this is #{place}"
  end

puts "place is: #{place}"

This prints:

hello main this is block
  place is world

So the +place+ variable in the block is not the same +place+ variable as
outside the block.  Removing <code>; place</code> from the block arguments
gives this result:

hello main this is block
  place is block

=== Array to Arguments Conversion

Given the following method:

def my_method(argument1, argument2, argument3)
  end

You can turn an Array into an argument list with <code>*</code> (or splat)
operator:

arguments = [1, 2, 3]
  my_method(*arguments)

or:

arguments = [2, 3]
  my_method(1, *arguments)

Both are equivalent to:

my_method(1, 2, 3)

You may also use the <code>**</code> (described next) to convert a Hash into
keyword arguments.

If the number of objects in the Array do not match the number of arguments for
the method, an ArgumentError will be raised.

If the splat operator comes first in the call, parentheses must be used to
avoid a warning:

my_method *arguments  # warning
  my_method(*arguments) # no warning

=== Hash to Keyword Arguments Conversion

Given the following method:

def my_method(first: 1, second: 2, third: 3)
  end

You can turn a Hash into keyword arguments with the <code>**</code>
(keyword splat) operator:

arguments = { first: 3, second: 4, third: 5 }
  my_method(**arguments)

or:

arguments = { first: 3, second: 4 }
  my_method(third: 5, **arguments)

Both are equivalent to:

my_method(first: 3, second: 4, third: 5)

If the method definition uses the keyword splat operator to
gather arbitrary keyword arguments, they will not be gathered
by <code>*</code>:

def my_method(*a, **kw)
    p arguments: a, keywords: kw
  end

my_method(1, 2, '3' => 4, five: 6)

Prints:

{:arguments=>[1, 2], :keywords=>{'3'=>4, :five=>6}}

=== Proc to Block Conversion

Given a method that use a block:

def my_method
    yield self
  end

You can convert a proc or lambda to a block argument with the <code>&</code>
(block conversion) operator:

argument = proc { |a| puts "#{a.inspect} was yielded" }

my_method(&argument)

If the block conversion operator comes first in the call, parenthesis must be
used to avoid a warning:

my_method &argument  # warning
  my_method(&argument) # no warning

== Method Lookup

Here is the order of method lookup for the receiver's class or module +R+:

* The prepended modules of +R+ in reverse order
* For a matching method in +R+
* The included modules of +R+ in reverse order

If +R+ is a class with a superclass, this is repeated with +R+'s superclass
until a method is found.

Once a match is found method lookup stops.

If no match is found this repeats from the beginning, but looking for
+method_missing+.  The default +method_missing+ is BasicObject#method_missing
which raises a NameError when invoked.

If refinements (an experimental feature) are active, the method lookup changes.
See the {refinements documentation}[rdoc-ref:syntax/refinements.rdoc] for
details.

📁 File Manager Pro

📁 File Manager Pro