✏️ Editing: http2.md Read Only

# HTTP/2

> Stability: 2 - Stable

The `node:http2` module provides an implementation of the [HTTP/2][] protocol.
It can be accessed using:

```js
const http2 = require('node:http2');
```

## Determining if crypto support is unavailable

It is possible for Node.js to be built without including support for the
`node:crypto` module. In such cases, attempting to `import` from `node:http2` or
calling `require('node:http2')` will result in an error being thrown.

When using CommonJS, the error thrown can be caught using try/catch:

```cjs
let http2;
try {
  http2 = require('node:http2');
} catch (err) {
  console.error('http2 support is disabled!');
}
```

When using the lexical ESM `import` keyword, the error can only be
caught if a handler for `process.on('uncaughtException')` is registered
_before_ any attempt to load the module is made (using, for instance,
a preload module).

When using ESM, if there is a chance that the code may be run on a build
of Node.js where crypto support is not enabled, consider using the
[`import()`][] function instead of the lexical `import` keyword:

```mjs
let http2;
try {
  http2 = await import('node:http2');
} catch (err) {
  console.error('http2 support is disabled!');
}
```

## Core API

The Core API provides a low-level interface designed specifically around
support for HTTP/2 protocol features. It is specifically _not_ designed for
compatibility with the existing [HTTP/1][] module API. However,
the [Compatibility API][] is.

The `http2` Core API is much more symmetric between client and server than the
`http` API. For instance, most events, like `'error'`, `'connect'` and
`'stream'`, can be emitted either by client-side code or server-side code.

### Server-side example

The following illustrates a simple HTTP/2 server using the Core API.
Since there are no browsers known that support
[unencrypted HTTP/2][HTTP/2 Unencrypted], the use of
[`http2.createSecureServer()`][] is necessary when communicating
with browser clients.

```mjs
import { createSecureServer } from 'node:http2';
import { readFileSync } from 'node:fs';

const server = createSecureServer({
  key: readFileSync('localhost-privkey.pem'),
  cert: readFileSync('localhost-cert.pem'),
});

server.on('error', (err) => console.error(err));

server.on('stream', (stream, headers) => {
  // stream is a Duplex
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.end('<h1>Hello World</h1>');
});

server.listen(8443);
```

```cjs
const http2 = require('node:http2');
const fs = require('node:fs');

const server = http2.createSecureServer({
  key: fs.readFileSync('localhost-privkey.pem'),
  cert: fs.readFileSync('localhost-cert.pem'),
});
server.on('error', (err) => console.error(err));

server.listen(8443);
```

To generate the certificate and key for this example, run:

```bash
openssl req -x509 -newkey rsa:2048 -nodes -sha256 -subj '/CN=localhost' \
  -keyout localhost-privkey.pem -out localhost-cert.pem
```

### Client-side example

The following illustrates an HTTP/2 client:

```mjs
import { connect } from 'node:http2';
import { readFileSync } from 'node:fs';

const client = connect('https://localhost:8443', {
  ca: readFileSync('localhost-cert.pem'),
});
client.on('error', (err) => console.error(err));

const req = client.request({ ':path': '/' });

req.on('response', (headers, flags) => {
  for (const name in headers) {
    console.log(`${name}: ${headers[name]}`);
  }
});

req.setEncoding('utf8');
let data = '';
req.on('data', (chunk) => { data += chunk; });
req.on('end', () => {
  console.log(`\n${data}`);
  client.close();
});
req.end();
```

```cjs
const http2 = require('node:http2');
const fs = require('node:fs');

const client = http2.connect('https://localhost:8443', {
  ca: fs.readFileSync('localhost-cert.pem'),
});
client.on('error', (err) => console.error(err));

const req = client.request({ ':path': '/' });

req.on('response', (headers, flags) => {
  for (const name in headers) {
    console.log(`${name}: ${headers[name]}`);
  }
});

req.setEncoding('utf8');
let data = '';
req.on('data', (chunk) => { data += chunk; });
req.on('end', () => {
  console.log(`\n${data}`);
  client.close();
});
req.end();
```

### Class: `Http2Session`

* Extends: {EventEmitter}

Instances of the `http2.Http2Session` class represent an active communications
session between an HTTP/2 client and server. Instances of this class are _not_
intended to be constructed directly by user code.

Each `Http2Session` instance will exhibit slightly different behaviors
depending on whether it is operating as a server or a client. The
`http2session.type` property can be used to determine the mode in which an
`Http2Session` is operating. On the server side, user code should rarely
have occasion to work with the `Http2Session` object directly, with most
actions typically taken through interactions with either the `Http2Server` or
`Http2Stream` objects.

User code will not create `Http2Session` instances directly. Server-side
`Http2Session` instances are created by the `Http2Server` instance when a
new HTTP/2 connection is received. Client-side `Http2Session` instances are
created using the `http2.connect()` method.

#### `Http2Session` and sockets

Every `Http2Session` instance is associated with exactly one [`net.Socket`][] or
[`tls.TLSSocket`][] when it is created. When either the `Socket` or the
`Http2Session` are destroyed, both will be destroyed.

Because of the specific serialization and processing requirements imposed
by the HTTP/2 protocol, it is not recommended for user code to read data from
or write data to a `Socket` instance bound to a `Http2Session`. Doing so can
put the HTTP/2 session into an indeterminate state causing the session and
the socket to become unusable.

Once a `Socket` has been bound to an `Http2Session`, user code should rely
solely on the API of the `Http2Session`.

#### Event: `'close'`

The `'close'` event is emitted once the `Http2Session` has been destroyed. Its
listener does not expect any arguments.

#### Event: `'connect'`

* `session` {Http2Session}
* `socket` {net.Socket}

The `'connect'` event is emitted once the `Http2Session` has been successfully
connected to the remote peer and communication may begin.

User code will typically not listen for this event directly.

#### Event: `'error'`

* `error` {Error}

The `'error'` event is emitted when an error occurs during the processing of
an `Http2Session`.

#### Event: `'frameError'`

* `type` {integer} The frame type.
* `code` {integer} The error code.
* `id` {integer} The stream id (or `0` if the frame isn't associated with a
  stream).

The `'frameError'` event is emitted when an error occurs while attempting to
send a frame on the session. If the frame that could not be sent is associated
with a specific `Http2Stream`, an attempt to emit a `'frameError'` event on the
`Http2Stream` is made.

If the `'frameError'` event is associated with a stream, the stream will be
closed and destroyed immediately following the `'frameError'` event. If the
event is not associated with a stream, the `Http2Session` will be shut down
immediately following the `'frameError'` event.

#### Event: `'goaway'`

* `errorCode` {number} The HTTP/2 error code specified in the `GOAWAY` frame.
* `lastStreamID` {number} The ID of the last stream the remote peer successfully
  processed (or `0` if no ID is specified).
* `opaqueData` {Buffer} If additional opaque data was included in the `GOAWAY`
  frame, a `Buffer` instance will be passed containing that data.

The `'goaway'` event is emitted when a `GOAWAY` frame is received.

The `Http2Session` instance will be shut down automatically when the `'goaway'`
event is emitted.

#### Event: `'localSettings'`

* `settings` {HTTP/2 Settings Object} A copy of the `SETTINGS` frame received.

The `'localSettings'` event is emitted when an acknowledgment `SETTINGS` frame
has been received.

When using `http2session.settings()` to submit new settings, the modified
settings do not take effect until the `'localSettings'` event is emitted.

```js
session.settings({ enablePush: false });

session.on('localSettings', (settings) => {
  /* Use the new settings */
});
```

#### Event: `'ping'`

* `payload` {Buffer} The `PING` frame 8-byte payload

The `'ping'` event is emitted whenever a `PING` frame is received from the
connected peer.

#### Event: `'remoteSettings'`

* `settings` {HTTP/2 Settings Object} A copy of the `SETTINGS` frame received.

The `'remoteSettings'` event is emitted when a new `SETTINGS` frame is received
from the connected peer.

```js
session.on('remoteSettings', (settings) => {
  /* Use the new settings */
});
```

#### Event: `'stream'`

* `stream` {Http2Stream} A reference to the stream
* `headers` {HTTP/2 Headers Object} An object describing the headers
* `flags` {number} The associated numeric flags
* `rawHeaders` {Array} An array containing the raw header names followed by
  their respective values.

The `'stream'` event is emitted when a new `Http2Stream` is created.

```js
session.on('stream', (stream, headers, flags) => {
  const method = headers[':method'];
  const path = headers[':path'];
  // ...
  stream.respond({
    ':status': 200,
    'content-type': 'text/plain; charset=utf-8',
  });
  stream.write('hello ');
  stream.end('world');
});
```

On the server side, user code will typically not listen for this event directly,
and would instead register a handler for the `'stream'` event emitted by the
`net.Server` or `tls.Server` instances returned by `http2.createServer()` and
`http2.createSecureServer()`, respectively, as in the example below:

```mjs
import { createServer } from 'node:http2';

// Create an unencrypted HTTP/2 server
const server = createServer();

server.on('stream', (stream, headers) => {
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.on('error', (error) => console.error(error));
  stream.end('<h1>Hello World</h1>');
});

server.listen(8000);
```

```cjs
const http2 = require('node:http2');

// Create an unencrypted HTTP/2 server
const server = http2.createServer();

server.listen(8000);
```

Even though HTTP/2 streams and network sockets are not in a 1:1 correspondence,
a network error will destroy each individual stream and must be handled on the
stream level, as shown above.

#### Event: `'timeout'`

After the `http2session.setTimeout()` method is used to set the timeout period
for this `Http2Session`, the `'timeout'` event is emitted if there is no
activity on the `Http2Session` after the configured number of milliseconds.
Its listener does not expect any arguments.

```js
session.setTimeout(2000);
session.on('timeout', () => { /* .. */ });
```

#### `http2session.alpnProtocol`

* {string|undefined}

Value will be `undefined` if the `Http2Session` is not yet connected to a
socket, `h2c` if the `Http2Session` is not connected to a `TLSSocket`, or
will return the value of the connected `TLSSocket`'s own `alpnProtocol`
property.

#### `http2session.close([callback])`

* `callback` {Function}

Gracefully closes the `Http2Session`, allowing any existing streams to
complete on their own and preventing new `Http2Stream` instances from being
created. Once closed, `http2session.destroy()` _might_ be called if there
are no open `Http2Stream` instances.

If specified, the `callback` function is registered as a handler for the
`'close'` event.

#### `http2session.closed`

* {boolean}

Will be `true` if this `Http2Session` instance has been closed, otherwise
`false`.

#### `http2session.connecting`

* {boolean}

Will be `true` if this `Http2Session` instance is still connecting, will be set
to `false` before emitting `connect` event and/or calling the `http2.connect`
callback.

#### `http2session.destroy([error][, code])`

* `error` {Error} An `Error` object if the `Http2Session` is being destroyed
  due to an error.
* `code` {number} The HTTP/2 error code to send in the final `GOAWAY` frame.
  If unspecified, and `error` is not undefined, the default is `INTERNAL_ERROR`,
  otherwise defaults to `NO_ERROR`.

Immediately terminates the `Http2Session` and the associated `net.Socket` or
`tls.TLSSocket`.

Once destroyed, the `Http2Session` will emit the `'close'` event. If `error`
is not undefined, an `'error'` event will be emitted immediately before the
`'close'` event.

If there are any remaining open `Http2Streams` associated with the
`Http2Session`, those will also be destroyed.

#### `http2session.destroyed`

* {boolean}

Will be `true` if this `Http2Session` instance has been destroyed and must no
longer be used, otherwise `false`.

#### `http2session.encrypted`

* {boolean|undefined}

Value is `undefined` if the `Http2Session` session socket has not yet been
connected, `true` if the `Http2Session` is connected with a `TLSSocket`,
and `false` if the `Http2Session` is connected to any other kind of socket
or stream.

#### `http2session.goaway([code[, lastStreamID[, opaqueData]]])`

* `code` {number} An HTTP/2 error code
* `lastStreamID` {number} The numeric ID of the last processed `Http2Stream`
* `opaqueData` {Buffer|TypedArray|DataView} A `TypedArray` or `DataView`
  instance containing additional data to be carried within the `GOAWAY` frame.

Transmits a `GOAWAY` frame to the connected peer _without_ shutting down the
`Http2Session`.

#### `http2session.localSettings`

* {HTTP/2 Settings Object}

A prototype-less object describing the current local settings of this
`Http2Session`. The local settings are local to _this_ `Http2Session` instance.

#### `http2session.originSet`

* {string\[]|undefined}

If the `Http2Session` is connected to a `TLSSocket`, the `originSet` property
will return an `Array` of origins for which the `Http2Session` may be
considered authoritative.

The `originSet` property is only available when using a secure TLS connection.

#### `http2session.pendingSettingsAck`

* {boolean}

Indicates whether the `Http2Session` is currently waiting for acknowledgment of
a sent `SETTINGS` frame. Will be `true` after calling the
`http2session.settings()` method. Will be `false` once all sent `SETTINGS`
frames have been acknowledged.

#### `http2session.ping([payload, ]callback)`

* `payload` {Buffer|TypedArray|DataView} Optional ping payload.
* `callback` {Function}
* Returns: {boolean}

Sends a `PING` frame to the connected HTTP/2 peer. A `callback` function must
be provided. The method will return `true` if the `PING` was sent, `false`
otherwise.

The maximum number of outstanding (unacknowledged) pings is determined by the
`maxOutstandingPings` configuration option. The default maximum is 10.

If provided, the `payload` must be a `Buffer`, `TypedArray`, or `DataView`
containing 8 bytes of data that will be transmitted with the `PING` and
returned with the ping acknowledgment.

The callback will be invoked with three arguments: an error argument that will
be `null` if the `PING` was successfully acknowledged, a `duration` argument
that reports the number of milliseconds elapsed since the ping was sent and the
acknowledgment was received, and a `Buffer` containing the 8-byte `PING`
payload.

```js
session.ping(Buffer.from('abcdefgh'), (err, duration, payload) => {
  if (!err) {
    console.log(`Ping acknowledged in ${duration} milliseconds`);
    console.log(`With payload '${payload.toString()}'`);
  }
});
```

If the `payload` argument is not specified, the default payload will be the
64-bit timestamp (little endian) marking the start of the `PING` duration.

#### `http2session.ref()`

Calls [`ref()`][`net.Socket.prototype.ref()`] on this `Http2Session`
instance's underlying [`net.Socket`][].

#### `http2session.remoteSettings`

* {HTTP/2 Settings Object}

A prototype-less object describing the current remote settings of this
`Http2Session`. The remote settings are set by the _connected_ HTTP/2 peer.

#### `http2session.setLocalWindowSize(windowSize)`

* `windowSize` {number}

Sets the local endpoint's window size.
The `windowSize` is the total window size to set, not
the delta.

```mjs
import { createServer } from 'node:http2';

const server = createServer();
const expectedWindowSize = 2 ** 20;
server.on('session', (session) => {

// Set local window size to be 2 ** 20
  session.setLocalWindowSize(expectedWindowSize);
});
```

```cjs
const http2 = require('node:http2');

const server = http2.createServer();
const expectedWindowSize = 2 ** 20;
server.on('session', (session) => {

// Set local window size to be 2 ** 20
  session.setLocalWindowSize(expectedWindowSize);
});
```

For http2 clients the proper event is either `'connect'` or `'remoteSettings'`.

#### `http2session.setTimeout(msecs, callback)`

* `msecs` {number}
* `callback` {Function}

Used to set a callback function that is called when there is no activity on
the `Http2Session` after `msecs` milliseconds. The given `callback` is
registered as a listener on the `'timeout'` event.

#### `http2session.socket`

* {net.Socket|tls.TLSSocket}

Returns a `Proxy` object that acts as a `net.Socket` (or `tls.TLSSocket`) but
limits available methods to ones safe to use with HTTP/2.

`destroy`, `emit`, `end`, `pause`, `read`, `resume`, and `write` will throw
an error with code `ERR_HTTP2_NO_SOCKET_MANIPULATION`. See
[`Http2Session` and Sockets][] for more information.

`setTimeout` method will be called on this `Http2Session`.

All other interactions will be routed directly to the socket.

#### `http2session.state`

Provides miscellaneous information about the current state of the
`Http2Session`.

* {Object}
  * `effectiveLocalWindowSize` {number} The current local (receive)
    flow control window size for the `Http2Session`.
  * `effectiveRecvDataLength` {number} The current number of bytes
    that have been received since the last flow control `WINDOW_UPDATE`.
  * `nextStreamID` {number} The numeric identifier to be used the
    next time a new `Http2Stream` is created by this `Http2Session`.
  * `localWindowSize` {number} The number of bytes that the remote peer can
    send without receiving a `WINDOW_UPDATE`.
  * `lastProcStreamID` {number} The numeric id of the `Http2Stream`
    for which a `HEADERS` or `DATA` frame was most recently received.
  * `remoteWindowSize` {number} The number of bytes that this `Http2Session`
    may send without receiving a `WINDOW_UPDATE`.
  * `outboundQueueSize` {number} The number of frames currently within the
    outbound queue for this `Http2Session`.
  * `deflateDynamicTableSize` {number} The current size in bytes of the
    outbound header compression state table.
  * `inflateDynamicTableSize` {number} The current size in bytes of the
    inbound header compression state table.

An object describing the current status of this `Http2Session`.

#### `http2session.settings([settings][, callback])`

* `settings` {HTTP/2 Settings Object}
* `callback` {Function} Callback that is called once the session is connected or
  right away if the session is already connected.
  * `err` {Error|null}
  * `settings` {HTTP/2 Settings Object} The updated `settings` object.
  * `duration` {integer}

Updates the current local settings for this `Http2Session` and sends a new
`SETTINGS` frame to the connected HTTP/2 peer.

Once called, the `http2session.pendingSettingsAck` property will be `true`
while the session is waiting for the remote peer to acknowledge the new
settings.

The new settings will not become effective until the `SETTINGS` acknowledgment
is received and the `'localSettings'` event is emitted. It is possible to send
multiple `SETTINGS` frames while acknowledgment is still pending.

#### `http2session.type`

* {number}

The `http2session.type` will be equal to
`http2.constants.NGHTTP2_SESSION_SERVER` if this `Http2Session` instance is a
server, and `http2.constants.NGHTTP2_SESSION_CLIENT` if the instance is a
client.

#### `http2session.unref()`

Calls [`unref()`][`net.Socket.prototype.unref()`] on this `Http2Session`
instance's underlying [`net.Socket`][].

### Class: `ServerHttp2Session`

* Extends: {Http2Session}

#### `serverhttp2session.altsvc(alt, originOrStream)`

* `alt` {string} A description of the alternative service configuration as
  defined by [RFC 7838][].
* `originOrStream` {number|string|URL|Object} Either a URL string specifying
  the origin (or an `Object` with an `origin` property) or the numeric
  identifier of an active `Http2Stream` as given by the `http2stream.id`
  property.

Submits an `ALTSVC` frame (as defined by [RFC 7838][]) to the connected client.

```mjs
import { createServer } from 'node:http2';

const server = createServer();
server.on('session', (session) => {
  // Set altsvc for origin https://example.org:80
  session.altsvc('h2=":8000"', 'https://example.org:80');
});

server.on('stream', (stream) => {
  // Set altsvc for a specific stream
  stream.session.altsvc('h2=":8000"', stream.id);
});
```

```cjs
const http2 = require('node:http2');

const server = http2.createServer();
server.on('session', (session) => {
  // Set altsvc for origin https://example.org:80
  session.altsvc('h2=":8000"', 'https://example.org:80');
});

server.on('stream', (stream) => {
  // Set altsvc for a specific stream
  stream.session.altsvc('h2=":8000"', stream.id);
});
```

Sending an `ALTSVC` frame with a specific stream ID indicates that the alternate
service is associated with the origin of the given `Http2Stream`.

The `alt` and origin string _must_ contain only ASCII bytes and are
strictly interpreted as a sequence of ASCII bytes. The special value `'clear'`
may be passed to clear any previously set alternative service for a given
domain.

When a string is passed for the `originOrStream` argument, it will be parsed as
a URL and the origin will be derived. For instance, the origin for the
HTTP URL `'https://example.org/foo/bar'` is the ASCII string
`'https://example.org'`. An error will be thrown if either the given string
cannot be parsed as a URL or if a valid origin cannot be derived.

A `URL` object, or any object with an `origin` property, may be passed as
`originOrStream`, in which case the value of the `origin` property will be
used. The value of the `origin` property _must_ be a properly serialized
ASCII origin.

#### Specifying alternative services

The format of the `alt` parameter is strictly defined by [RFC 7838][] as an
ASCII string containing a comma-delimited list of "alternative" protocols
associated with a specific host and port.

For example, the value `'h2="example.org:81"'` indicates that the HTTP/2
protocol is available on the host `'example.org'` on TCP/IP port 81. The
host and port _must_ be contained within the quote (`"`) characters.

Multiple alternatives may be specified, for instance: `'h2="example.org:81",
h2=":82"'`.

The protocol identifier (`'h2'` in the examples) may be any valid
[ALPN Protocol ID][].

The syntax of these values is not validated by the Node.js implementation and
are passed through as provided by the user or received from the peer.

#### `serverhttp2session.origin(...origins)`

* `origins` { string | URL | Object } One or more URL Strings passed as
  separate arguments.

Submits an `ORIGIN` frame (as defined by [RFC 8336][]) to the connected client
to advertise the set of origins for which the server is capable of providing
authoritative responses.

```mjs
import { createSecureServer } from 'node:http2';
const options = getSecureOptionsSomehow();
const server = createSecureServer(options);
server.on('stream', (stream) => {
  stream.respond();
  stream.end('ok');
});
server.on('session', (session) => {
  session.origin('https://example.com', 'https://example.org');
});
```

```cjs
const http2 = require('node:http2');
const options = getSecureOptionsSomehow();
const server = http2.createSecureServer(options);
server.on('stream', (stream) => {
  stream.respond();
  stream.end('ok');
});
server.on('session', (session) => {
  session.origin('https://example.com', 'https://example.org');
});
```

When a string is passed as an `origin`, it will be parsed as a URL and the
origin will be derived. For instance, the origin for the HTTP URL
`'https://example.org/foo/bar'` is the ASCII string
`'https://example.org'`. An error will be thrown if either the given string
cannot be parsed as a URL or if a valid origin cannot be derived.

A `URL` object, or any object with an `origin` property, may be passed as
an `origin`, in which case the value of the `origin` property will be
used. The value of the `origin` property _must_ be a properly serialized
ASCII origin.

Alternatively, the `origins` option may be used when creating a new HTTP/2
server using the `http2.createSecureServer()` method:

```mjs
import { createSecureServer } from 'node:http2';
const options = getSecureOptionsSomehow();
options.origins = ['https://example.com', 'https://example.org'];
const server = createSecureServer(options);
server.on('stream', (stream) => {
  stream.respond();
  stream.end('ok');
});
```

```cjs
const http2 = require('node:http2');
const options = getSecureOptionsSomehow();
options.origins = ['https://example.com', 'https://example.org'];
const server = http2.createSecureServer(options);
server.on('stream', (stream) => {
  stream.respond();
  stream.end('ok');
});
```

### Class: `ClientHttp2Session`

* Extends: {Http2Session}

#### Event: `'altsvc'`

* `alt` {string}
* `origin` {string}
* `streamId` {number}

The `'altsvc'` event is emitted whenever an `ALTSVC` frame is received by
the client. The event is emitted with the `ALTSVC` value, origin, and stream
ID. If no `origin` is provided in the `ALTSVC` frame, `origin` will
be an empty string.

```mjs
import { connect } from 'node:http2';
const client = connect('https://example.org');

client.on('altsvc', (alt, origin, streamId) => {
  console.log(alt);
  console.log(origin);
  console.log(streamId);
});
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('https://example.org');

client.on('altsvc', (alt, origin, streamId) => {
  console.log(alt);
  console.log(origin);
  console.log(streamId);
});
```

#### Event: `'origin'`

* `origins` {string\[]}

The `'origin'` event is emitted whenever an `ORIGIN` frame is received by
the client. The event is emitted with an array of `origin` strings. The
`http2session.originSet` will be updated to include the received
origins.

```mjs
import { connect } from 'node:http2';
const client = connect('https://example.org');

client.on('origin', (origins) => {
  for (let n = 0; n < origins.length; n++)
    console.log(origins[n]);
});
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('https://example.org');

client.on('origin', (origins) => {
  for (let n = 0; n < origins.length; n++)
    console.log(origins[n]);
});
```

The `'origin'` event is only emitted when using a secure TLS connection.

#### `clienthttp2session.request(headers[, options])`

* `headers` {HTTP/2 Headers Object}

* `options` {Object}
  * `endStream` {boolean} `true` if the `Http2Stream` _writable_ side should
    be closed initially, such as when sending a `GET` request that should not
    expect a payload body.
  * `exclusive` {boolean} When `true` and `parent` identifies a parent Stream,
    the created stream is made the sole direct dependency of the parent, with
    all other existing dependents made a dependent of the newly created stream.
    **Default:** `false`.
  * `parent` {number} Specifies the numeric identifier of a stream the newly
    created stream is dependent on.
  * `weight` {number} Specifies the relative dependency of a stream in relation
    to other streams with the same `parent`. The value is a number between `1`
    and `256` (inclusive). This has been **deprecated** in [RFC 9113][], and
    support for it will be removed in future versions of Node.js.
  * `waitForTrailers` {boolean} When `true`, the `Http2Stream` will emit the
    `'wantTrailers'` event after the final `DATA` frame has been sent.
  * `signal` {AbortSignal} An AbortSignal that may be used to abort an ongoing
    request.

* Returns: {ClientHttp2Stream}

For HTTP/2 Client `Http2Session` instances only, the `http2session.request()`
creates and returns an `Http2Stream` instance that can be used to send an
HTTP/2 request to the connected server.

When a `ClientHttp2Session` is first created, the socket may not yet be
connected. if `clienthttp2session.request()` is called during this time, the
actual request will be deferred until the socket is ready to go.
If the `session` is closed before the actual request be executed, an
`ERR_HTTP2_GOAWAY_SESSION` is thrown.

This method is only available if `http2session.type` is equal to
`http2.constants.NGHTTP2_SESSION_CLIENT`.

```mjs
import { connect, constants } from 'node:http2';
const clientSession = connect('https://localhost:1234');
const {
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
} = constants;

```cjs
const http2 = require('node:http2');
const clientSession = http2.connect('https://localhost:1234');
const {
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
} = http2.constants;

When the `options.waitForTrailers` option is set, the `'wantTrailers'` event
is emitted immediately after queuing the last chunk of payload data to be sent.
The `http2stream.sendTrailers()` method can then be called to send trailing
headers to the peer.

When `options.waitForTrailers` is set, the `Http2Stream` will not automatically
close when the final `DATA` frame is transmitted. User code must call either
`http2stream.sendTrailers()` or `http2stream.close()` to close the
`Http2Stream`.

When `options.signal` is set with an `AbortSignal` and then `abort` on the
corresponding `AbortController` is called, the request will emit an `'error'`
event with an `AbortError` error.

The `:method` and `:path` pseudo-headers are not specified within `headers`,
they respectively default to:

* `:method` = `'GET'`
* `:path` = `/`

### Class: `Http2Stream`

* Extends: {stream.Duplex}

Each instance of the `Http2Stream` class represents a bidirectional HTTP/2
communications stream over an `Http2Session` instance. Any single `Http2Session`
may have up to 2<sup>31</sup>-1 `Http2Stream` instances over its lifetime.

User code will not construct `Http2Stream` instances directly. Rather, these
are created, managed, and provided to user code through the `Http2Session`
instance. On the server, `Http2Stream` instances are created either in response
to an incoming HTTP request (and handed off to user code via the `'stream'`
event), or in response to a call to the `http2stream.pushStream()` method.
On the client, `Http2Stream` instances are created and returned when either the
`http2session.request()` method is called, or in response to an incoming
`'push'` event.

The `Http2Stream` class is a base for the [`ServerHttp2Stream`][] and
[`ClientHttp2Stream`][] classes, each of which is used specifically by either
the Server or Client side, respectively.

All `Http2Stream` instances are [`Duplex`][] streams. The `Writable` side of the
`Duplex` is used to send data to the connected peer, while the `Readable` side
is used to receive data sent by the connected peer.

The default text character encoding for an `Http2Stream` is UTF-8. When using an
`Http2Stream` to send text, use the `'content-type'` header to set the character
encoding.

```js
stream.respond({
  'content-type': 'text/html; charset=utf-8',
  ':status': 200,
});
```

#### `Http2Stream` Lifecycle

##### Creation

On the server side, instances of [`ServerHttp2Stream`][] are created either
when:

* A new HTTP/2 `HEADERS` frame with a previously unused stream ID is received;
* The `http2stream.pushStream()` method is called.

On the client side, instances of [`ClientHttp2Stream`][] are created when the
`http2session.request()` method is called.

On the client, the `Http2Stream` instance returned by `http2session.request()`
may not be immediately ready for use if the parent `Http2Session` has not yet
been fully established. In such cases, operations called on the `Http2Stream`
will be buffered until the `'ready'` event is emitted. User code should rarely,
if ever, need to handle the `'ready'` event directly. The ready status of an
`Http2Stream` can be determined by checking the value of `http2stream.id`. If
the value is `undefined`, the stream is not yet ready for use.

##### Destruction

All [`Http2Stream`][] instances are destroyed either when:

* An `RST_STREAM` frame for the stream is received by the connected peer,
  and (for client streams only) pending data has been read.
* The `http2stream.close()` method is called, and (for client streams only)
  pending data has been read.
* The `http2stream.destroy()` or `http2session.destroy()` methods are called.

When an `Http2Stream` instance is destroyed, an attempt will be made to send an
`RST_STREAM` frame to the connected peer.

When the `Http2Stream` instance is destroyed, the `'close'` event will
be emitted. Because `Http2Stream` is an instance of `stream.Duplex`, the
`'end'` event will also be emitted if the stream data is currently flowing.
The `'error'` event may also be emitted if `http2stream.destroy()` was called
with an `Error` passed as the first argument.

After the `Http2Stream` has been destroyed, the `http2stream.destroyed`
property will be `true` and the `http2stream.rstCode` property will specify the
`RST_STREAM` error code. The `Http2Stream` instance is no longer usable once
destroyed.

#### Event: `'aborted'`

The `'aborted'` event is emitted whenever a `Http2Stream` instance is
abnormally aborted in mid-communication.
Its listener does not expect any arguments.

The `'aborted'` event will only be emitted if the `Http2Stream` writable side
has not been ended.

#### Event: `'close'`

The `'close'` event is emitted when the `Http2Stream` is destroyed. Once
this event is emitted, the `Http2Stream` instance is no longer usable.

The HTTP/2 error code used when closing the stream can be retrieved using
the `http2stream.rstCode` property. If the code is any value other than
`NGHTTP2_NO_ERROR` (`0`), an `'error'` event will have also been emitted.

#### Event: `'error'`

* `error` {Error}

The `'error'` event is emitted when an error occurs during the processing of
an `Http2Stream`.

#### Event: `'frameError'`

* `type` {integer} The frame type.
* `code` {integer} The error code.
* `id` {integer} The stream id (or `0` if the frame isn't associated with a
  stream).

The `'frameError'` event is emitted when an error occurs while attempting to
send a frame. When invoked, the handler function will receive an integer
argument identifying the frame type, and an integer argument identifying the
error code. The `Http2Stream` instance will be destroyed immediately after the
`'frameError'` event is emitted.

#### Event: `'ready'`

The `'ready'` event is emitted when the `Http2Stream` has been opened, has
been assigned an `id`, and can be used. The listener does not expect any
arguments.

#### Event: `'timeout'`

The `'timeout'` event is emitted after no activity is received for this
`Http2Stream` within the number of milliseconds set using
`http2stream.setTimeout()`.
Its listener does not expect any arguments.

#### Event: `'trailers'`

* `headers` {HTTP/2 Headers Object} An object describing the headers
* `flags` {number} The associated numeric flags

The `'trailers'` event is emitted when a block of headers associated with
trailing header fields is received. The listener callback is passed the
[HTTP/2 Headers Object][] and flags associated with the headers.

This event might not be emitted if `http2stream.end()` is called
before trailers are received and the incoming data is not being read or
listened for.

```js
stream.on('trailers', (headers, flags) => {
  console.log(headers);
});
```

#### Event: `'wantTrailers'`

The `'wantTrailers'` event is emitted when the `Http2Stream` has queued the
final `DATA` frame to be sent on a frame and the `Http2Stream` is ready to send
trailing headers. When initiating a request or response, the `waitForTrailers`
option must be set for this event to be emitted.

#### `http2stream.aborted`

* {boolean}

Set to `true` if the `Http2Stream` instance was aborted abnormally. When set,
the `'aborted'` event will have been emitted.

#### `http2stream.bufferSize`

* {number}

This property shows the number of characters currently buffered to be written.
See [`net.Socket.bufferSize`][] for details.

#### `http2stream.close(code[, callback])`

* `code` {number} Unsigned 32-bit integer identifying the error code.
  **Default:** `http2.constants.NGHTTP2_NO_ERROR` (`0x00`).
* `callback` {Function} An optional function registered to listen for the
  `'close'` event.

Closes the `Http2Stream` instance by sending an `RST_STREAM` frame to the
connected HTTP/2 peer.

#### `http2stream.closed`

* {boolean}

Set to `true` if the `Http2Stream` instance has been closed.

#### `http2stream.destroyed`

* {boolean}

Set to `true` if the `Http2Stream` instance has been destroyed and is no longer
usable.

#### `http2stream.endAfterHeaders`

* {boolean}

Set to `true` if the `END_STREAM` flag was set in the request or response
HEADERS frame received, indicating that no additional data should be received
and the readable side of the `Http2Stream` will be closed.

#### `http2stream.id`

* {number|undefined}

The numeric stream identifier of this `Http2Stream` instance. Set to `undefined`
if the stream identifier has not yet been assigned.

#### `http2stream.pending`

* {boolean}

Set to `true` if the `Http2Stream` instance has not yet been assigned a
numeric stream identifier.

#### `http2stream.priority(options)`

> Stability: 0 - Deprecated: support for priority signaling has been deprecated
> in the [RFC 9113][] and is no longer supported in Node.js.

* `options` {Object}
  * `exclusive` {boolean} When `true` and `parent` identifies a parent Stream,
    this stream is made the sole direct dependency of the parent, with
    all other existing dependents made a dependent of this stream. **Default:**
    `false`.
  * `parent` {number} Specifies the numeric identifier of a stream this stream
    is dependent on.
  * `weight` {number} Specifies the relative dependency of a stream in relation
    to other streams with the same `parent`. The value is a number between `1`
    and `256` (inclusive).
  * `silent` {boolean} When `true`, changes the priority locally without
    sending a `PRIORITY` frame to the connected peer.

Updates the priority for this `Http2Stream` instance.

#### `http2stream.rstCode`

* {number}

Set to the `RST_STREAM` [error code][] reported when the `Http2Stream` is
destroyed after either receiving an `RST_STREAM` frame from the connected peer,
calling `http2stream.close()`, or `http2stream.destroy()`. Will be
`undefined` if the `Http2Stream` has not been closed.

#### `http2stream.sentHeaders`

* {HTTP/2 Headers Object}

An object containing the outbound headers sent for this `Http2Stream`.

#### `http2stream.sentInfoHeaders`

* {HTTP/2 Headers Object\[]}

An array of objects containing the outbound informational (additional) headers
sent for this `Http2Stream`.

#### `http2stream.sentTrailers`

* {HTTP/2 Headers Object}

An object containing the outbound trailers sent for this `HttpStream`.

#### `http2stream.session`

* {Http2Session}

A reference to the `Http2Session` instance that owns this `Http2Stream`. The
value will be `undefined` after the `Http2Stream` instance is destroyed.

#### `http2stream.setTimeout(msecs, callback)`

* `msecs` {number}
* `callback` {Function}

```mjs
import { connect, constants } from 'node:http2';
const client = connect('http://example.org:8000');
const { NGHTTP2_CANCEL } = constants;
const req = client.request({ ':path': '/' });

// Cancel the stream if there's no activity after 5 seconds
req.setTimeout(5000, () => req.close(NGHTTP2_CANCEL));
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('http://example.org:8000');
const { NGHTTP2_CANCEL } = http2.constants;
const req = client.request({ ':path': '/' });

// Cancel the stream if there's no activity after 5 seconds
req.setTimeout(5000, () => req.close(NGHTTP2_CANCEL));
```

#### `http2stream.state`

Provides miscellaneous information about the current state of the
`Http2Stream`.

* {Object}
  * `localWindowSize` {number} The number of bytes the connected peer may send
    for this `Http2Stream` without receiving a `WINDOW_UPDATE`.
  * `state` {number} A flag indicating the low-level current state of the
    `Http2Stream` as determined by `nghttp2`.
  * `localClose` {number} `1` if this `Http2Stream` has been closed locally.
  * `remoteClose` {number} `1` if this `Http2Stream` has been closed
    remotely.
  * `sumDependencyWeight` {number} The sum weight of all `Http2Stream`
    instances that depend on this `Http2Stream` as specified using
    `PRIORITY` frames. This has been **deprecated** in [RFC 9113][], and
    support for it will be removed in future versions of Node.js.
  * `weight` {number} The priority weight of this `Http2Stream`. This has been
    **deprecated** in [RFC 9113][], and support for it will be removed in future
    versions of Node.js.

A current state of this `Http2Stream`.

#### `http2stream.sendTrailers(headers)`

* `headers` {HTTP/2 Headers Object}

Sends a trailing `HEADERS` frame to the connected HTTP/2 peer. This method
will cause the `Http2Stream` to be immediately closed and must only be
called after the `'wantTrailers'` event has been emitted. When sending a
request or sending a response, the `options.waitForTrailers` option must be set
in order to keep the `Http2Stream` open after the final `DATA` frame so that
trailers can be sent.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  stream.respond(undefined, { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ xyz: 'abc' });
  });
  stream.end('Hello World');
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  stream.respond(undefined, { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ xyz: 'abc' });
  });
  stream.end('Hello World');
});
```

The HTTP/1 specification forbids trailers from containing HTTP/2 pseudo-header
fields (e.g. `':method'`, `':path'`, etc).

### Class: `ClientHttp2Stream`

* Extends {Http2Stream}

The `ClientHttp2Stream` class is an extension of `Http2Stream` that is
used exclusively on HTTP/2 Clients. `Http2Stream` instances on the client
provide events such as `'response'` and `'push'` that are only relevant on
the client.

#### Event: `'continue'`

Emitted when the server sends a `100 Continue` status, usually because
the request contained `Expect: 100-continue`. This is an instruction that
the client should send the request body.

#### Event: `'headers'`

* `headers` {HTTP/2 Headers Object}
* `flags` {number}

The `'headers'` event is emitted when an additional block of headers is received
for a stream, such as when a block of `1xx` informational headers is received.
The listener callback is passed the [HTTP/2 Headers Object][] and flags
associated with the headers.

```js
stream.on('headers', (headers, flags) => {
  console.log(headers);
});
```

#### Event: `'push'`

* `headers` {HTTP/2 Headers Object}
* `flags` {number}

The `'push'` event is emitted when response headers for a Server Push stream
are received. The listener callback is passed the [HTTP/2 Headers Object][] and
flags associated with the headers.

```js
stream.on('push', (headers, flags) => {
  console.log(headers);
});
```

#### Event: `'response'`

* `headers` {HTTP/2 Headers Object}
* `flags` {number}

The `'response'` event is emitted when a response `HEADERS` frame has been
received for this stream from the connected HTTP/2 server. The listener is
invoked with two arguments: an `Object` containing the received
[HTTP/2 Headers Object][], and flags associated with the headers.

```mjs
import { connect } from 'node:http2';
const client = connect('https://localhost');
const req = client.request({ ':path': '/' });
req.on('response', (headers, flags) => {
  console.log(headers[':status']);
});
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('https://localhost');
const req = client.request({ ':path': '/' });
req.on('response', (headers, flags) => {
  console.log(headers[':status']);
});
```

### Class: `ServerHttp2Stream`

* Extends: {Http2Stream}

The `ServerHttp2Stream` class is an extension of [`Http2Stream`][] that is
used exclusively on HTTP/2 Servers. `Http2Stream` instances on the server
provide additional methods such as `http2stream.pushStream()` and
`http2stream.respond()` that are only relevant on the server.

#### `http2stream.additionalHeaders(headers)`

* `headers` {HTTP/2 Headers Object}

Sends an additional informational `HEADERS` frame to the connected HTTP/2 peer.

#### `http2stream.headersSent`

* {boolean}

True if headers were sent, false otherwise (read-only).

#### `http2stream.pushAllowed`

* {boolean}

Read-only property mapped to the `SETTINGS_ENABLE_PUSH` flag of the remote
client's most recent `SETTINGS` frame. Will be `true` if the remote peer
accepts push streams, `false` otherwise. Settings are the same for every
`Http2Stream` in the same `Http2Session`.

#### `http2stream.pushStream(headers[, options], callback)`

* `headers` {HTTP/2 Headers Object}
* `options` {Object}
  * `exclusive` {boolean} When `true` and `parent` identifies a parent Stream,
    the created stream is made the sole direct dependency of the parent, with
    all other existing dependents made a dependent of the newly created stream.
    **Default:** `false`.
  * `parent` {number} Specifies the numeric identifier of a stream the newly
    created stream is dependent on.
* `callback` {Function} Callback that is called once the push stream has been
  initiated.
  * `err` {Error}
  * `pushStream` {ServerHttp2Stream} The returned `pushStream` object.
  * `headers` {HTTP/2 Headers Object} Headers object the `pushStream` was
    initiated with.

Initiates a push stream. The callback is invoked with the new `Http2Stream`
instance created for the push stream passed as the second argument, or an
`Error` passed as the first argument.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 });
  stream.pushStream({ ':path': '/' }, (err, pushStream, headers) => {
    if (err) throw err;
    pushStream.respond({ ':status': 200 });
    pushStream.end('some pushed data');
  });
  stream.end('some data');
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 });
  stream.pushStream({ ':path': '/' }, (err, pushStream, headers) => {
    if (err) throw err;
    pushStream.respond({ ':status': 200 });
    pushStream.end('some pushed data');
  });
  stream.end('some data');
});
```

Setting the weight of a push stream is not allowed in the `HEADERS` frame. Pass
a `weight` value to `http2stream.priority` with the `silent` option set to
`true` to enable server-side bandwidth balancing between concurrent streams.

Calling `http2stream.pushStream()` from within a pushed stream is not permitted
and will throw an error.

#### `http2stream.respond([headers[, options]])`

* `headers` {HTTP/2 Headers Object}
* `options` {Object}
  * `endStream` {boolean} Set to `true` to indicate that the response will not
    include payload data.
  * `waitForTrailers` {boolean} When `true`, the `Http2Stream` will emit the
    `'wantTrailers'` event after the final `DATA` frame has been sent.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 });
  stream.end('some data');
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 });
  stream.end('some data');
});
```

Initiates a response. When the `options.waitForTrailers` option is set, the
`'wantTrailers'` event will be emitted immediately after queuing the last chunk
of payload data to be sent. The `http2stream.sendTrailers()` method can then be
used to sent trailing header fields to the peer.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 }, { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ ABC: 'some value to send' });
  });
  stream.end('some data');
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  stream.respond({ ':status': 200 }, { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ ABC: 'some value to send' });
  });
  stream.end('some data');
});
```

#### `http2stream.respondWithFD(fd[, headers[, options]])`

* `fd` {number|FileHandle} A readable file descriptor.
* `headers` {HTTP/2 Headers Object}
* `options` {Object}
  * `statCheck` {Function}
  * `waitForTrailers` {boolean} When `true`, the `Http2Stream` will emit the
    `'wantTrailers'` event after the final `DATA` frame has been sent.
  * `offset` {number} The offset position at which to begin reading.
  * `length` {number} The amount of data from the fd to send.

Initiates a response whose data is read from the given file descriptor. No
validation is performed on the given file descriptor. If an error occurs while
attempting to read data using the file descriptor, the `Http2Stream` will be
closed using an `RST_STREAM` frame using the standard `INTERNAL_ERROR` code.

When used, the `Http2Stream` object's `Duplex` interface will be closed
automatically.

```mjs
import { createServer } from 'node:http2';
import { openSync, fstatSync, closeSync } from 'node:fs';

const server = createServer();
server.on('stream', (stream) => {
  const fd = openSync('/some/file', 'r');

const stat = fstatSync(fd);
  const headers = {
    'content-length': stat.size,
    'last-modified': stat.mtime.toUTCString(),
    'content-type': 'text/plain; charset=utf-8',
  };
  stream.respondWithFD(fd, headers);
  stream.on('close', () => closeSync(fd));
});
```

```cjs
const http2 = require('node:http2');
const fs = require('node:fs');

const server = http2.createServer();
server.on('stream', (stream) => {
  const fd = fs.openSync('/some/file', 'r');

const stat = fs.fstatSync(fd);
  const headers = {
    'content-length': stat.size,
    'last-modified': stat.mtime.toUTCString(),
    'content-type': 'text/plain; charset=utf-8',
  };
  stream.respondWithFD(fd, headers);
  stream.on('close', () => fs.closeSync(fd));
});
```

The optional `options.statCheck` function may be specified to give user code
an opportunity to set additional content headers based on the `fs.Stat` details
of the given fd. If the `statCheck` function is provided, the
`http2stream.respondWithFD()` method will perform an `fs.fstat()` call to
collect details on the provided file descriptor.

The `offset` and `length` options may be used to limit the response to a
specific range subset. This can be used, for instance, to support HTTP Range
requests.

The file descriptor or `FileHandle` is not closed when the stream is closed,
so it will need to be closed manually once it is no longer needed.
Using the same file descriptor concurrently for multiple streams
is not supported and may result in data loss. Re-using a file descriptor
after a stream has finished is supported.

When the `options.waitForTrailers` option is set, the `'wantTrailers'` event
will be emitted immediately after queuing the last chunk of payload data to be
sent. The `http2stream.sendTrailers()` method can then be used to sent trailing
header fields to the peer.

When `options.waitForTrailers` is set, the `Http2Stream` will not automatically
close when the final `DATA` frame is transmitted. User code _must_ call either
`http2stream.sendTrailers()` or `http2stream.close()` to close the
`Http2Stream`.

```mjs
import { createServer } from 'node:http2';
import { openSync, fstatSync, closeSync } from 'node:fs';

const server = createServer();
server.on('stream', (stream) => {
  const fd = openSync('/some/file', 'r');

stream.on('close', () => closeSync(fd));
});
```

```cjs
const http2 = require('node:http2');
const fs = require('node:fs');

const server = http2.createServer();
server.on('stream', (stream) => {
  const fd = fs.openSync('/some/file', 'r');

stream.on('close', () => fs.closeSync(fd));
});
```

#### `http2stream.respondWithFile(path[, headers[, options]])`

* `path` {string|Buffer|URL}
* `headers` {HTTP/2 Headers Object}
* `options` {Object}
  * `statCheck` {Function}
  * `onError` {Function} Callback function invoked in the case of an
    error before send.
  * `waitForTrailers` {boolean} When `true`, the `Http2Stream` will emit the
    `'wantTrailers'` event after the final `DATA` frame has been sent.
  * `offset` {number} The offset position at which to begin reading.
  * `length` {number} The amount of data from the fd to send.

Sends a regular file as the response. The `path` must specify a regular file
or an `'error'` event will be emitted on the `Http2Stream` object.

When used, the `Http2Stream` object's `Duplex` interface will be closed
automatically.

The optional `options.statCheck` function may be specified to give user code
an opportunity to set additional content headers based on the `fs.Stat` details
of the given file:

If an error occurs while attempting to read the file data, the `Http2Stream`
will be closed using an `RST_STREAM` frame using the standard `INTERNAL_ERROR`
code. If the `onError` callback is defined, then it will be called. Otherwise
the stream will be destroyed.

Example using a file path:

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  function statCheck(stat, headers) {
    headers['last-modified'] = stat.mtime.toUTCString();
  }

stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { statCheck, onError });
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  function statCheck(stat, headers) {
    headers['last-modified'] = stat.mtime.toUTCString();
  }

stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { statCheck, onError });
});
```

The `options.statCheck` function may also be used to cancel the send operation
by returning `false`. For instance, a conditional request may check the stat
results to determine if the file has been modified to return an appropriate
`304` response:

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  function statCheck(stat, headers) {
    // Check the stat here...
    stream.respond({ ':status': 304 });
    return false; // Cancel the send operation
  }
  stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { statCheck });
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  function statCheck(stat, headers) {
    // Check the stat here...
    stream.respond({ ':status': 304 });
    return false; // Cancel the send operation
  }
  stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { statCheck });
});
```

The `content-length` header field will be automatically set.

The `offset` and `length` options may be used to limit the response to a
specific range subset. This can be used, for instance, to support HTTP Range
requests.

The `options.onError` function may also be used to handle all the errors
that could happen before the delivery of the file is initiated. The
default behavior is to destroy the stream.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream) => {
  stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ ABC: 'some value to send' });
  });
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream) => {
  stream.respondWithFile('/some/file',
                         { 'content-type': 'text/plain; charset=utf-8' },
                         { waitForTrailers: true });
  stream.on('wantTrailers', () => {
    stream.sendTrailers({ ABC: 'some value to send' });
  });
});
```

### Class: `Http2Server`

* Extends: {net.Server}

Instances of `Http2Server` are created using the `http2.createServer()`
function. The `Http2Server` class is not exported directly by the
`node:http2` module.

#### Event: `'checkContinue'`

* `request` {http2.Http2ServerRequest}
* `response` {http2.Http2ServerResponse}

If a [`'request'`][] listener is registered or [`http2.createServer()`][] is
supplied a callback function, the `'checkContinue'` event is emitted each time
a request with an HTTP `Expect: 100-continue` is received. If this event is
not listened for, the server will automatically respond with a status
`100 Continue` as appropriate.

Handling this event involves calling [`response.writeContinue()`][] if the
client should continue to send the request body, or generating an appropriate
HTTP response (e.g. 400 Bad Request) if the client should not continue to send
the request body.

When this event is emitted and handled, the [`'request'`][] event will
not be emitted.

#### Event: `'connection'`

* `socket` {stream.Duplex}

This event is emitted when a new TCP stream is established. `socket` is
typically an object of type [`net.Socket`][]. Usually users will not want to
access this event.

This event can also be explicitly emitted by users to inject connections
into the HTTP server. In that case, any [`Duplex`][] stream can be passed.

#### Event: `'request'`

* `request` {http2.Http2ServerRequest}
* `response` {http2.Http2ServerResponse}

Emitted each time there is a request. There may be multiple requests
per session. See the [Compatibility API][].

#### Event: `'session'`

* `session` {ServerHttp2Session}

The `'session'` event is emitted when a new `Http2Session` is created by the
`Http2Server`.

#### Event: `'sessionError'`

* `error` {Error}
* `session` {ServerHttp2Session}

The `'sessionError'` event is emitted when an `'error'` event is emitted by
an `Http2Session` object associated with the `Http2Server`.

#### Event: `'stream'`

The `'stream'` event is emitted when a `'stream'` event has been emitted by
an `Http2Session` associated with the server.

See also [`Http2Session`'s `'stream'` event][].

```mjs
import { createServer, constants } from 'node:http2';
const {
  HTTP2_HEADER_METHOD,
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
  HTTP2_HEADER_CONTENT_TYPE,
} = constants;

const server = createServer();
server.on('stream', (stream, headers, flags) => {
  const method = headers[HTTP2_HEADER_METHOD];
  const path = headers[HTTP2_HEADER_PATH];
  // ...
  stream.respond({
    [HTTP2_HEADER_STATUS]: 200,
    [HTTP2_HEADER_CONTENT_TYPE]: 'text/plain; charset=utf-8',
  });
  stream.write('hello ');
  stream.end('world');
});
```

```cjs
const http2 = require('node:http2');
const {
  HTTP2_HEADER_METHOD,
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
  HTTP2_HEADER_CONTENT_TYPE,
} = http2.constants;

const server = http2.createServer();
server.on('stream', (stream, headers, flags) => {
  const method = headers[HTTP2_HEADER_METHOD];
  const path = headers[HTTP2_HEADER_PATH];
  // ...
  stream.respond({
    [HTTP2_HEADER_STATUS]: 200,
    [HTTP2_HEADER_CONTENT_TYPE]: 'text/plain; charset=utf-8',
  });
  stream.write('hello ');
  stream.end('world');
});
```

#### Event: `'timeout'`

The `'timeout'` event is emitted when there is no activity on the Server for
a given number of milliseconds set using `http2server.setTimeout()`.
**Default:** 0 (no timeout)

#### `server.close([callback])`

* `callback` {Function}

Stops the server from establishing new sessions. This does not prevent new
request streams from being created due to the persistent nature of HTTP/2
sessions. To gracefully shut down the server, call [`http2session.close()`][] on
all active sessions.

If `callback` is provided, it is not invoked until all active sessions have been
closed, although the server has already stopped allowing new sessions. See
[`net.Server.close()`][] for more details.

#### `server[Symbol.asyncDispose]()`

> Stability: 1 - Experimental

Calls [`server.close()`][] and returns a promise that fulfills when the
server has closed.

#### `server.setTimeout([msecs][, callback])`

* `msecs` {number} **Default:** 0 (no timeout)
* `callback` {Function}
* Returns: {Http2Server}

Used to set the timeout value for http2 server requests,
and sets a callback function that is called when there is no activity
on the `Http2Server` after `msecs` milliseconds.

The given callback is registered as a listener on the `'timeout'` event.

In case if `callback` is not a function, a new `ERR_INVALID_ARG_TYPE`
error will be thrown.

#### `server.timeout`

* {number} Timeout in milliseconds. **Default:** 0 (no timeout)

The number of milliseconds of inactivity before a socket is presumed
to have timed out.

A value of `0` will disable the timeout behavior on incoming connections.

The socket timeout logic is set up on connection, so changing this
value only affects new connections to the server, not any existing connections.

#### `server.updateSettings([settings])`

* `settings` {HTTP/2 Settings Object}

Used to update the server with the provided settings.

Throws `ERR_HTTP2_INVALID_SETTING_VALUE` for invalid `settings` values.

Throws `ERR_INVALID_ARG_TYPE` for invalid `settings` argument.

### Class: `Http2SecureServer`

* Extends: {tls.Server}

Instances of `Http2SecureServer` are created using the
`http2.createSecureServer()` function. The `Http2SecureServer` class is not
exported directly by the `node:http2` module.

#### Event: `'checkContinue'`

* `request` {http2.Http2ServerRequest}
* `response` {http2.Http2ServerResponse}

If a [`'request'`][] listener is registered or [`http2.createSecureServer()`][]
is supplied a callback function, the `'checkContinue'` event is emitted each
time a request with an HTTP `Expect: 100-continue` is received. If this event
is not listened for, the server will automatically respond with a status
`100 Continue` as appropriate.

When this event is emitted and handled, the [`'request'`][] event will
not be emitted.

#### Event: `'connection'`

* `socket` {stream.Duplex}

This event is emitted when a new TCP stream is established, before the TLS
handshake begins. `socket` is typically an object of type [`net.Socket`][].
Usually users will not want to access this event.

This event can also be explicitly emitted by users to inject connections
into the HTTP server. In that case, any [`Duplex`][] stream can be passed.

#### Event: `'request'`

* `request` {http2.Http2ServerRequest}
* `response` {http2.Http2ServerResponse}

Emitted each time there is a request. There may be multiple requests
per session. See the [Compatibility API][].

#### Event: `'session'`

* `session` {ServerHttp2Session}

The `'session'` event is emitted when a new `Http2Session` is created by the
`Http2SecureServer`.

#### Event: `'sessionError'`

* `error` {Error}
* `session` {ServerHttp2Session}

The `'sessionError'` event is emitted when an `'error'` event is emitted by
an `Http2Session` object associated with the `Http2SecureServer`.

#### Event: `'stream'`

The `'stream'` event is emitted when a `'stream'` event has been emitted by
an `Http2Session` associated with the server.

See also [`Http2Session`'s `'stream'` event][].

```mjs
import { createSecureServer, constants } from 'node:http2';
const {
  HTTP2_HEADER_METHOD,
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
  HTTP2_HEADER_CONTENT_TYPE,
} = constants;

const options = getOptionsSomehow();

const server = createSecureServer(options);
server.on('stream', (stream, headers, flags) => {
  const method = headers[HTTP2_HEADER_METHOD];
  const path = headers[HTTP2_HEADER_PATH];
  // ...
  stream.respond({
    [HTTP2_HEADER_STATUS]: 200,
    [HTTP2_HEADER_CONTENT_TYPE]: 'text/plain; charset=utf-8',
  });
  stream.write('hello ');
  stream.end('world');
});
```

```cjs
const http2 = require('node:http2');
const {
  HTTP2_HEADER_METHOD,
  HTTP2_HEADER_PATH,
  HTTP2_HEADER_STATUS,
  HTTP2_HEADER_CONTENT_TYPE,
} = http2.constants;

const options = getOptionsSomehow();

const server = http2.createSecureServer(options);
server.on('stream', (stream, headers, flags) => {
  const method = headers[HTTP2_HEADER_METHOD];
  const path = headers[HTTP2_HEADER_PATH];
  // ...
  stream.respond({
    [HTTP2_HEADER_STATUS]: 200,
    [HTTP2_HEADER_CONTENT_TYPE]: 'text/plain; charset=utf-8',
  });
  stream.write('hello ');
  stream.end('world');
});
```

#### Event: `'timeout'`

The `'timeout'` event is emitted when there is no activity on the Server for
a given number of milliseconds set using `http2secureServer.setTimeout()`.
**Default:** 2 minutes.

#### Event: `'unknownProtocol'`

* `socket` {stream.Duplex}

The `'unknownProtocol'` event is emitted when a connecting client fails to
negotiate an allowed protocol (i.e. HTTP/2 or HTTP/1.1). The event handler
receives the socket for handling. If no listener is registered for this event,
the connection is terminated. A timeout may be specified using the
`'unknownProtocolTimeout'` option passed to [`http2.createSecureServer()`][].

In earlier versions of Node.js, this event would be emitted if `allowHTTP1` is
`false` and, during the TLS handshake, the client either does not send an ALPN
extension or sends an ALPN extension that does not include HTTP/2 (`h2`). Newer
versions of Node.js only emit this event if `allowHTTP1` is `false` and the
client does not send an ALPN extension. If the client sends an ALPN extension
that does not include HTTP/2 (or HTTP/1.1 if `allowHTTP1` is `true`), the TLS
handshake will fail and no secure connection will be established.

See the [Compatibility API][].

#### `server.close([callback])`

* `callback` {Function}

If `callback` is provided, it is not invoked until all active sessions have been
closed, although the server has already stopped allowing new sessions. See
[`tls.Server.close()`][] for more details.

#### `server.setTimeout([msecs][, callback])`

* `msecs` {number} **Default:** `120000` (2 minutes)
* `callback` {Function}
* Returns: {Http2SecureServer}

Used to set the timeout value for http2 secure server requests,
and sets a callback function that is called when there is no activity
on the `Http2SecureServer` after `msecs` milliseconds.

The given callback is registered as a listener on the `'timeout'` event.

In case if `callback` is not a function, a new `ERR_INVALID_ARG_TYPE`
error will be thrown.

#### `server.timeout`

* {number} Timeout in milliseconds. **Default:** 0 (no timeout)

The number of milliseconds of inactivity before a socket is presumed
to have timed out.

A value of `0` will disable the timeout behavior on incoming connections.

The socket timeout logic is set up on connection, so changing this
value only affects new connections to the server, not any existing connections.

#### `server.updateSettings([settings])`

* `settings` {HTTP/2 Settings Object}

Used to update the server with the provided settings.

Throws `ERR_HTTP2_INVALID_SETTING_VALUE` for invalid `settings` values.

Throws `ERR_INVALID_ARG_TYPE` for invalid `settings` argument.

### `http2.createServer([options][, onRequestHandler])`

* `options` {Object}
  * `maxDeflateDynamicTableSize` {number} Sets the maximum dynamic table size
    for deflating header fields. **Default:** `4Kib`.
  * `maxSettings` {number} Sets the maximum number of settings entries per
    `SETTINGS` frame. The minimum value allowed is `1`. **Default:** `32`.
  * `maxSessionMemory`{number} Sets the maximum memory that the `Http2Session`
    is permitted to use. The value is expressed in terms of number of megabytes,
    e.g. `1` equal 1 megabyte. The minimum value allowed is `1`.
    This is a credit based limit, existing `Http2Stream`s may cause this
    limit to be exceeded, but new `Http2Stream` instances will be rejected
    while this limit is exceeded. The current number of `Http2Stream` sessions,
    the current memory use of the header compression tables, current data
    queued to be sent, and unacknowledged `PING` and `SETTINGS` frames are all
    counted towards the current limit. **Default:** `10`.
  * `maxHeaderListPairs` {number} Sets the maximum number of header entries.
    This is similar to [`server.maxHeadersCount`][] or
    [`request.maxHeadersCount`][] in the `node:http` module. The minimum value
    is `4`. **Default:** `128`.
  * `maxOutstandingPings` {number} Sets the maximum number of outstanding,
    unacknowledged pings. **Default:** `10`.
  * `maxSendHeaderBlockLength` {number} Sets the maximum allowed size for a
    serialized, compressed block of headers. Attempts to send headers that
    exceed this limit will result in a `'frameError'` event being emitted
    and the stream being closed and destroyed.
    While this sets the maximum allowed size to the entire block of headers,
    `nghttp2` (the internal http2 library) has a limit of `65536`
    for each decompressed key/value pair.
  * `paddingStrategy` {number} The strategy used for determining the amount of
    padding to use for `HEADERS` and `DATA` frames. **Default:**
    `http2.constants.PADDING_STRATEGY_NONE`. Value may be one of:
    * `http2.constants.PADDING_STRATEGY_NONE`: No padding is applied.
    * `http2.constants.PADDING_STRATEGY_MAX`: The maximum amount of padding,
      determined by the internal implementation, is applied.
    * `http2.constants.PADDING_STRATEGY_ALIGNED`: Attempts to apply enough
      padding to ensure that the total frame length, including the 9-byte
      header, is a multiple of 8. For each frame, there is a maximum allowed
      number of padding bytes that is determined by current flow control state
      and settings. If this maximum is less than the calculated amount needed to
      ensure alignment, the maximum is used and the total frame length is not
      necessarily aligned at 8 bytes.
  * `peerMaxConcurrentStreams` {number} Sets the maximum number of concurrent
    streams for the remote peer as if a `SETTINGS` frame had been received. Will
    be overridden if the remote peer sets its own value for
    `maxConcurrentStreams`. **Default:** `100`.
  * `maxSessionInvalidFrames` {integer} Sets the maximum number of invalid
    frames that will be tolerated before the session is closed.
    **Default:** `1000`.
  * `maxSessionRejectedStreams` {integer} Sets the maximum number of rejected
    upon creation streams that will be tolerated before the session is closed.
    Each rejection is associated with an `NGHTTP2_ENHANCE_YOUR_CALM`
    error that should tell the peer to not open any more streams, continuing
    to open streams is therefore regarded as a sign of a misbehaving peer.
    **Default:** `100`.
  * `settings` {HTTP/2 Settings Object} The initial settings to send to the
    remote peer upon connection.
  * `remoteCustomSettings` {Array} The array of integer values determines the
    settings types, which are included in the `CustomSettings`-property of
    the received remoteSettings. Please see the `CustomSettings`-property of
    the `Http2Settings` object for more information,
    on the allowed setting types.
  * `Http1IncomingMessage` {http.IncomingMessage} Specifies the
    `IncomingMessage` class to used for HTTP/1 fallback. Useful for extending
    the original `http.IncomingMessage`. **Default:** `http.IncomingMessage`.
  * `Http1ServerResponse` {http.ServerResponse} Specifies the `ServerResponse`
    class to used for HTTP/1 fallback. Useful for extending the original
    `http.ServerResponse`. **Default:** `http.ServerResponse`.
  * `Http2ServerRequest` {http2.Http2ServerRequest} Specifies the
    `Http2ServerRequest` class to use.
    Useful for extending the original `Http2ServerRequest`.
    **Default:** `Http2ServerRequest`.
  * `Http2ServerResponse` {http2.Http2ServerResponse} Specifies the
    `Http2ServerResponse` class to use.
    Useful for extending the original `Http2ServerResponse`.
    **Default:** `Http2ServerResponse`.
  * `unknownProtocolTimeout` {number} Specifies a timeout in milliseconds that
    a server should wait when an [`'unknownProtocol'`][] is emitted. If the
    socket has not been destroyed by that time the server will destroy it.
    **Default:** `10000`.
  * ...: Any [`net.createServer()`][] option can be provided.
* `onRequestHandler` {Function} See [Compatibility API][]
* Returns: {Http2Server}

Returns a `net.Server` instance that creates and manages `Http2Session`
instances.

Since there are no browsers known that support
[unencrypted HTTP/2][HTTP/2 Unencrypted], the use of
[`http2.createSecureServer()`][] is necessary when communicating
with browser clients.

```mjs
import { createServer } from 'node:http2';

// Create an unencrypted HTTP/2 server.
// Since there are no browsers known that support
// unencrypted HTTP/2, the use of `createSecureServer()`
// is necessary when communicating with browser clients.
const server = createServer();

server.on('stream', (stream, headers) => {
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.end('<h1>Hello World</h1>');
});

server.listen(8000);
```

```cjs
const http2 = require('node:http2');

// Create an unencrypted HTTP/2 server.
// Since there are no browsers known that support
// unencrypted HTTP/2, the use of `http2.createSecureServer()`
// is necessary when communicating with browser clients.
const server = http2.createServer();

server.on('stream', (stream, headers) => {
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.end('<h1>Hello World</h1>');
});

server.listen(8000);
```

### `http2.createSecureServer(options[, onRequestHandler])`

* `options` {Object}
  * `allowHTTP1` {boolean} Incoming client connections that do not support
    HTTP/2 will be downgraded to HTTP/1.x when set to `true`.
    See the [`'unknownProtocol'`][] event. See [ALPN negotiation][].
    **Default:** `false`.
  * `maxDeflateDynamicTableSize` {number} Sets the maximum dynamic table size
    for deflating header fields. **Default:** `4Kib`.
  * `maxSettings` {number} Sets the maximum number of settings entries per
    `SETTINGS` frame. The minimum value allowed is `1`. **Default:** `32`.
  * `maxSessionMemory`{number} Sets the maximum memory that the `Http2Session`
    is permitted to use. The value is expressed in terms of number of megabytes,
    e.g. `1` equal 1 megabyte. The minimum value allowed is `1`. This is a
    credit based limit, existing `Http2Stream`s may cause this
    limit to be exceeded, but new `Http2Stream` instances will be rejected
    while this limit is exceeded. The current number of `Http2Stream` sessions,
    the current memory use of the header compression tables, current data
    queued to be sent, and unacknowledged `PING` and `SETTINGS` frames are all
    counted towards the current limit. **Default:** `10`.
  * `maxHeaderListPairs` {number} Sets the maximum number of header entries.
    This is similar to [`server.maxHeadersCount`][] or
    [`request.maxHeadersCount`][] in the `node:http` module. The minimum value
    is `4`. **Default:** `128`.
  * `maxOutstandingPings` {number} Sets the maximum number of outstanding,
    unacknowledged pings. **Default:** `10`.
  * `maxSendHeaderBlockLength` {number} Sets the maximum allowed size for a
    serialized, compressed block of headers. Attempts to send headers that
    exceed this limit will result in a `'frameError'` event being emitted
    and the stream being closed and destroyed.
  * `paddingStrategy` {number} Strategy used for determining the amount of
    padding to use for `HEADERS` and `DATA` frames. **Default:**
    `http2.constants.PADDING_STRATEGY_NONE`. Value may be one of:
    * `http2.constants.PADDING_STRATEGY_NONE`: No padding is applied.
    * `http2.constants.PADDING_STRATEGY_MAX`: The maximum amount of padding,
      determined by the internal implementation, is applied.
    * `http2.constants.PADDING_STRATEGY_ALIGNED`: Attempts to apply enough
      padding to ensure that the total frame length, including the
      9-byte header, is a multiple of 8. For each frame, there is a maximum
      allowed number of padding bytes that is determined by current flow control
      state and settings. If this maximum is less than the calculated amount
      needed to ensure alignment, the maximum is used and the total frame length
      is not necessarily aligned at 8 bytes.
  * `peerMaxConcurrentStreams` {number} Sets the maximum number of concurrent
    streams for the remote peer as if a `SETTINGS` frame had been received. Will
    be overridden if the remote peer sets its own value for
    `maxConcurrentStreams`. **Default:** `100`.
  * `maxSessionInvalidFrames` {integer} Sets the maximum number of invalid
    frames that will be tolerated before the session is closed.
    **Default:** `1000`.
  * `maxSessionRejectedStreams` {integer} Sets the maximum number of rejected
    upon creation streams that will be tolerated before the session is closed.
    Each rejection is associated with an `NGHTTP2_ENHANCE_YOUR_CALM`
    error that should tell the peer to not open any more streams, continuing
    to open streams is therefore regarded as a sign of a misbehaving peer.
    **Default:** `100`.
  * `settings` {HTTP/2 Settings Object} The initial settings to send to the
    remote peer upon connection.
  * `remoteCustomSettings` {Array} The array of integer values determines the
    settings types, which are included in the `customSettings`-property of the
    received remoteSettings. Please see the `customSettings`-property of the
    `Http2Settings` object for more information, on the allowed setting types.
  * ...: Any [`tls.createServer()`][] options can be provided. For
    servers, the identity options (`pfx` or `key`/`cert`) are usually required.
  * `origins` {string\[]} An array of origin strings to send within an `ORIGIN`
    frame immediately following creation of a new server `Http2Session`.
  * `unknownProtocolTimeout` {number} Specifies a timeout in milliseconds that
    a server should wait when an [`'unknownProtocol'`][] event is emitted. If
    the socket has not been destroyed by that time the server will destroy it.
    **Default:** `10000`.
* `onRequestHandler` {Function} See [Compatibility API][]
* Returns: {Http2SecureServer}

Returns a `tls.Server` instance that creates and manages `Http2Session`
instances.

```mjs
import { createSecureServer } from 'node:http2';
import { readFileSync } from 'node:fs';

const options = {
  key: readFileSync('server-key.pem'),
  cert: readFileSync('server-cert.pem'),
};

// Create a secure HTTP/2 server
const server = createSecureServer(options);

server.on('stream', (stream, headers) => {
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.end('<h1>Hello World</h1>');
});

server.listen(8443);
```

```cjs
const http2 = require('node:http2');
const fs = require('node:fs');

const options = {
  key: fs.readFileSync('server-key.pem'),
  cert: fs.readFileSync('server-cert.pem'),
};

// Create a secure HTTP/2 server
const server = http2.createSecureServer(options);

server.on('stream', (stream, headers) => {
  stream.respond({
    'content-type': 'text/html; charset=utf-8',
    ':status': 200,
  });
  stream.end('<h1>Hello World</h1>');
});

server.listen(8443);
```

### `http2.connect(authority[, options][, listener])`

* `authority` {string|URL} The remote HTTP/2 server to connect to. This must
  be in the form of a minimal, valid URL with the `http://` or `https://`
  prefix, host name, and IP port (if a non-default port is used). Userinfo
  (user ID and password), path, querystring, and fragment details in the
  URL will be ignored.
* `options` {Object}
  * `maxDeflateDynamicTableSize` {number} Sets the maximum dynamic table size
    for deflating header fields. **Default:** `4Kib`.
  * `maxSettings` {number} Sets the maximum number of settings entries per
    `SETTINGS` frame. The minimum value allowed is `1`. **Default:** `32`.
  * `maxSessionMemory`{number} Sets the maximum memory that the `Http2Session`
    is permitted to use. The value is expressed in terms of number of megabytes,
    e.g. `1` equal 1 megabyte. The minimum value allowed is `1`.
    This is a credit based limit, existing `Http2Stream`s may cause this
    limit to be exceeded, but new `Http2Stream` instances will be rejected
    while this limit is exceeded. The current number of `Http2Stream` sessions,
    the current memory use of the header compression tables, current data
    queued to be sent, and unacknowledged `PING` and `SETTINGS` frames are all
    counted towards the current limit. **Default:** `10`.
  * `maxHeaderListPairs` {number} Sets the maximum number of header entries.
    This is similar to [`server.maxHeadersCount`][] or
    [`request.maxHeadersCount`][] in the `node:http` module. The minimum value
    is `1`. **Default:** `128`.
  * `maxOutstandingPings` {number} Sets the maximum number of outstanding,
    unacknowledged pings. **Default:** `10`.
  * `maxReservedRemoteStreams` {number} Sets the maximum number of reserved push
    streams the client will accept at any given time. Once the current number of
    currently reserved push streams exceeds reaches this limit, new push streams
    sent by the server will be automatically rejected. The minimum allowed value
    is 0. The maximum allowed value is 2<sup>32</sup>-1. A negative value sets
    this option to the maximum allowed value. **Default:** `200`.
  * `maxSendHeaderBlockLength` {number} Sets the maximum allowed size for a
    serialized, compressed block of headers. Attempts to send headers that
    exceed this limit will result in a `'frameError'` event being emitted
    and the stream being closed and destroyed.
  * `paddingStrategy` {number} Strategy used for determining the amount of
    padding to use for `HEADERS` and `DATA` frames. **Default:**
    `http2.constants.PADDING_STRATEGY_NONE`. Value may be one of:
    * `http2.constants.PADDING_STRATEGY_NONE`: No padding is applied.
    * `http2.constants.PADDING_STRATEGY_MAX`: The maximum amount of padding,
      determined by the internal implementation, is applied.
    * `http2.constants.PADDING_STRATEGY_ALIGNED`: Attempts to apply enough
      padding to ensure that the total frame length, including the
      9-byte header, is a multiple of 8. For each frame, there is a maximum
      allowed number of padding bytes that is determined by current flow control
      state and settings. If this maximum is less than the calculated amount
      needed to ensure alignment, the maximum is used and the total frame length
      is not necessarily aligned at 8 bytes.
  * `peerMaxConcurrentStreams` {number} Sets the maximum number of concurrent
    streams for the remote peer as if a `SETTINGS` frame had been received. Will
    be overridden if the remote peer sets its own value for
    `maxConcurrentStreams`. **Default:** `100`.
  * `protocol` {string} The protocol to connect with, if not set in the
    `authority`. Value may be either `'http:'` or `'https:'`. **Default:**
    `'https:'`
  * `settings` {HTTP/2 Settings Object} The initial settings to send to the
    remote peer upon connection.
  * `remoteCustomSettings` {Array} The array of integer values determines the
    settings types, which are included in the `CustomSettings`-property of the
    received remoteSettings. Please see the `CustomSettings`-property of the
    `Http2Settings` object for more information, on the allowed setting types.
  * `createConnection` {Function} An optional callback that receives the `URL`
    instance passed to `connect` and the `options` object, and returns any
    [`Duplex`][] stream that is to be used as the connection for this session.
  * ...: Any [`net.connect()`][] or [`tls.connect()`][] options can be provided.
  * `unknownProtocolTimeout` {number} Specifies a timeout in milliseconds that
    a server should wait when an [`'unknownProtocol'`][] event is emitted. If
    the socket has not been destroyed by that time the server will destroy it.
    **Default:** `10000`.
* `listener` {Function} Will be registered as a one-time listener of the
  [`'connect'`][] event.
* Returns: {ClientHttp2Session}

Returns a `ClientHttp2Session` instance.

```mjs
import { connect } from 'node:http2';
const client = connect('https://localhost:1234');

/* Use the client */

client.close();
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('https://localhost:1234');

/* Use the client */

client.close();
```

### `http2.constants`

#### Error codes for `RST_STREAM` and `GOAWAY`

| Value  | Name                | Constant                                      |
| ------ | ------------------- | --------------------------------------------- |
| `0x00` | No Error            | `http2.constants.NGHTTP2_NO_ERROR`            |
| `0x01` | Protocol Error      | `http2.constants.NGHTTP2_PROTOCOL_ERROR`      |
| `0x02` | Internal Error      | `http2.constants.NGHTTP2_INTERNAL_ERROR`      |
| `0x03` | Flow Control Error  | `http2.constants.NGHTTP2_FLOW_CONTROL_ERROR`  |
| `0x04` | Settings Timeout    | `http2.constants.NGHTTP2_SETTINGS_TIMEOUT`    |
| `0x05` | Stream Closed       | `http2.constants.NGHTTP2_STREAM_CLOSED`       |
| `0x06` | Frame Size Error    | `http2.constants.NGHTTP2_FRAME_SIZE_ERROR`    |
| `0x07` | Refused Stream      | `http2.constants.NGHTTP2_REFUSED_STREAM`      |
| `0x08` | Cancel              | `http2.constants.NGHTTP2_CANCEL`              |
| `0x09` | Compression Error   | `http2.constants.NGHTTP2_COMPRESSION_ERROR`   |
| `0x0a` | Connect Error       | `http2.constants.NGHTTP2_CONNECT_ERROR`       |
| `0x0b` | Enhance Your Calm   | `http2.constants.NGHTTP2_ENHANCE_YOUR_CALM`   |
| `0x0c` | Inadequate Security | `http2.constants.NGHTTP2_INADEQUATE_SECURITY` |
| `0x0d` | HTTP/1.1 Required   | `http2.constants.NGHTTP2_HTTP_1_1_REQUIRED`   |

The `'timeout'` event is emitted when there is no activity on the Server for
a given number of milliseconds set using `http2server.setTimeout()`.

### `http2.getDefaultSettings()`

* Returns: {HTTP/2 Settings Object}

Returns an object containing the default settings for an `Http2Session`
instance. This method returns a new object instance every time it is called
so instances returned may be safely modified for use.

### `http2.getPackedSettings([settings])`

* `settings` {HTTP/2 Settings Object}
* Returns: {Buffer}

Returns a `Buffer` instance containing serialized representation of the given
HTTP/2 settings as specified in the [HTTP/2][] specification. This is intended
for use with the `HTTP2-Settings` header field.

```mjs
import { getPackedSettings } from 'node:http2';

const packed = getPackedSettings({ enablePush: false });

console.log(packed.toString('base64'));
// Prints: AAIAAAAA
```

```cjs
const http2 = require('node:http2');

const packed = http2.getPackedSettings({ enablePush: false });

console.log(packed.toString('base64'));
// Prints: AAIAAAAA
```

### `http2.getUnpackedSettings(buf)`

* `buf` {Buffer|TypedArray} The packed settings.
* Returns: {HTTP/2 Settings Object}

Returns a [HTTP/2 Settings Object][] containing the deserialized settings from
the given `Buffer` as generated by `http2.getPackedSettings()`.

### `http2.performServerHandshake(socket[, options])`

* `socket` {stream.Duplex}
* `options` {Object}
  * ...: Any [`http2.createServer()`][] option can be provided.
* Returns: {ServerHttp2Session}

Create an HTTP/2 server session from an existing socket.

### `http2.sensitiveHeaders`

* {symbol}

This symbol can be set as a property on the HTTP/2 headers object with an array
value in order to provide a list of headers considered sensitive.
See [Sensitive headers][] for more details.

### Headers object

Headers are represented as own-properties on JavaScript objects. The property
keys will be serialized to lower-case. Property values should be strings (if
they are not they will be coerced to strings) or an `Array` of strings (in order
to send more than one value per header field).

```js
const headers = {
  ':status': '200',
  'content-type': 'text-plain',
  'ABC': ['has', 'more', 'than', 'one', 'value'],
};

stream.respond(headers);
```

Header objects passed to callback functions will have a `null` prototype. This
means that normal JavaScript object methods such as
`Object.prototype.toString()` and `Object.prototype.hasOwnProperty()` will
not work.

For incoming headers:

* The `:status` header is converted to `number`.
* Duplicates of `:status`, `:method`, `:authority`, `:scheme`, `:path`,
  `:protocol`, `age`, `authorization`, `access-control-allow-credentials`,
  `access-control-max-age`, `access-control-request-method`, `content-encoding`,
  `content-language`, `content-length`, `content-location`, `content-md5`,
  `content-range`, `content-type`, `date`, `dnt`, `etag`, `expires`, `from`,
  `host`, `if-match`, `if-modified-since`, `if-none-match`, `if-range`,
  `if-unmodified-since`, `last-modified`, `location`, `max-forwards`,
  `proxy-authorization`, `range`, `referer`,`retry-after`, `tk`,
  `upgrade-insecure-requests`, `user-agent` or `x-content-type-options` are
  discarded.
* `set-cookie` is always an array. Duplicates are added to the array.
* For duplicate `cookie` headers, the values are joined together with '; '.
* For all other headers, the values are joined together with ', '.

```mjs
import { createServer } from 'node:http2';
const server = createServer();
server.on('stream', (stream, headers) => {
  console.log(headers[':path']);
  console.log(headers.ABC);
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer();
server.on('stream', (stream, headers) => {
  console.log(headers[':path']);
  console.log(headers.ABC);
});
```

#### Sensitive headers

HTTP2 headers can be marked as sensitive, which means that the HTTP/2
header compression algorithm will never index them. This can make sense for
header values with low entropy and that may be considered valuable to an
attacker, for example `Cookie` or `Authorization`. To achieve this, add
the header name to the `[http2.sensitiveHeaders]` property as an array:

```js
const headers = {
  ':status': '200',
  'content-type': 'text-plain',
  'cookie': 'some-cookie',
  'other-sensitive-header': 'very secret data',
  [http2.sensitiveHeaders]: ['cookie', 'other-sensitive-header'],
};

stream.respond(headers);
```

For some headers, such as `Authorization` and short `Cookie` headers,
this flag is set automatically.

This property is also set for received headers. It will contain the names of
all headers marked as sensitive, including ones marked that way automatically.

### Settings object

The `http2.getDefaultSettings()`, `http2.getPackedSettings()`,
`http2.createServer()`, `http2.createSecureServer()`,
`http2session.settings()`, `http2session.localSettings`, and
`http2session.remoteSettings` APIs either return or receive as input an
object that defines configuration settings for an `Http2Session` object.
These objects are ordinary JavaScript objects containing the following
properties.

* `headerTableSize` {number} Specifies the maximum number of bytes used for
  header compression. The minimum allowed value is 0. The maximum allowed value
  is 2<sup>32</sup>-1. **Default:** `4096`.
* `enablePush` {boolean} Specifies `true` if HTTP/2 Push Streams are to be
  permitted on the `Http2Session` instances. **Default:** `true`.
* `initialWindowSize` {number} Specifies the _sender's_ initial window size in
  bytes for stream-level flow control. The minimum allowed value is 0. The
  maximum allowed value is 2<sup>32</sup>-1. **Default:** `65535`.
* `maxFrameSize` {number} Specifies the size in bytes of the largest frame
  payload. The minimum allowed value is 16,384. The maximum allowed value is
  2<sup>24</sup>-1. **Default:** `16384`.
* `maxConcurrentStreams` {number} Specifies the maximum number of concurrent
  streams permitted on an `Http2Session`. There is no default value which
  implies, at least theoretically, 2<sup>32</sup>-1 streams may be open
  concurrently at any given time in an `Http2Session`. The minimum value
  is 0. The maximum allowed value is 2<sup>32</sup>-1. **Default:**
  `4294967295`.
* `maxHeaderListSize` {number} Specifies the maximum size (uncompressed octets)
  of header list that will be accepted. The minimum allowed value is 0. The
  maximum allowed value is 2<sup>32</sup>-1. **Default:** `65535`.
* `maxHeaderSize` {number} Alias for `maxHeaderListSize`.
* `enableConnectProtocol`{boolean} Specifies `true` if the "Extended Connect
  Protocol" defined by [RFC 8441][] is to be enabled. This setting is only
  meaningful if sent by the server. Once the `enableConnectProtocol` setting
  has been enabled for a given `Http2Session`, it cannot be disabled.
  **Default:** `false`.
* `customSettings` {Object} Specifies additional settings, yet not implemented
  in node and the underlying libraries. The key of the object defines the
  numeric value of the settings type (as defined in the "HTTP/2 SETTINGS"
  registry established by \[RFC 7540]) and the values the actual numeric value
  of the settings.
  The settings type has to be an integer in the range from 1 to 2^16-1.
  It should not be a settings type already handled by node, i.e. currently
  it should be greater than 6, although it is not an error.
  The values need to be unsigned integers in the range from 0 to 2^32-1.
  Currently, a maximum of up 10 custom settings is supported.
  It is only supported for sending SETTINGS, or for receiving settings values
  specified in the `remoteCustomSettings` options of the server or client
  object. Do not mix the `customSettings`-mechanism for a settings id with
  interfaces for the natively handled settings, in case a setting becomes
  natively supported in a future node version.

All additional properties on the settings object are ignored.

### Error handling

There are several types of error conditions that may arise when using the
`node:http2` module:

Validation errors occur when an incorrect argument, option, or setting value is
passed in. These will always be reported by a synchronous `throw`.

State errors occur when an action is attempted at an incorrect time (for
instance, attempting to send data on a stream after it has closed). These will
be reported using either a synchronous `throw` or via an `'error'` event on
the `Http2Stream`, `Http2Session` or HTTP/2 Server objects, depending on where
and when the error occurs.

Internal errors occur when an HTTP/2 session fails unexpectedly. These will be
reported via an `'error'` event on the `Http2Session` or HTTP/2 Server objects.

Protocol errors occur when various HTTP/2 protocol constraints are violated.
These will be reported using either a synchronous `throw` or via an `'error'`
event on the `Http2Stream`, `Http2Session` or HTTP/2 Server objects, depending
on where and when the error occurs.

### Invalid character handling in header names and values

The HTTP/2 implementation applies stricter handling of invalid characters in
HTTP header names and values than the HTTP/1 implementation.

Header field names are _case-insensitive_ and are transmitted over the wire
strictly as lower-case strings. The API provided by Node.js allows header
names to be set as mixed-case strings (e.g. `Content-Type`) but will convert
those to lower-case (e.g. `content-type`) upon transmission.

Header field-names _must only_ contain one or more of the following ASCII
characters: `a`-`z`, `A`-`Z`, `0`-`9`, `!`, `#`, `$`, `%`, `&`, `'`, `*`, `+`,
`-`, `.`, `^`, `_`, `` ` `` (backtick), `|`, and `~`.

Using invalid characters within an HTTP header field name will cause the
stream to be closed with a protocol error being reported.

Header field values are handled with more leniency but _should_ not contain
new-line or carriage return characters and _should_ be limited to US-ASCII
characters, per the requirements of the HTTP specification.

### Push streams on the client

To receive pushed streams on the client, set a listener for the `'stream'`
event on the `ClientHttp2Session`:

```mjs
import { connect } from 'node:http2';

const client = connect('http://localhost');

client.on('stream', (pushedStream, requestHeaders) => {
  pushedStream.on('push', (responseHeaders) => {
    // Process response headers
  });
  pushedStream.on('data', (chunk) => { /* handle pushed data */ });
});

const req = client.request({ ':path': '/' });
```

```cjs
const http2 = require('node:http2');

const client = http2.connect('http://localhost');

const req = client.request({ ':path': '/' });
```

### Supporting the `CONNECT` method

The `CONNECT` method is used to allow an HTTP/2 server to be used as a proxy
for TCP/IP connections.

A simple TCP Server:

```mjs
import { createServer } from 'node:net';

const server = createServer((socket) => {
  let name = '';
  socket.setEncoding('utf8');
  socket.on('data', (chunk) => name += chunk);
  socket.on('end', () => socket.end(`hello ${name}`));
});

server.listen(8000);
```

```cjs
const net = require('node:net');

const server = net.createServer((socket) => {
  let name = '';
  socket.setEncoding('utf8');
  socket.on('data', (chunk) => name += chunk);
  socket.on('end', () => socket.end(`hello ${name}`));
});

server.listen(8000);
```

An HTTP/2 CONNECT proxy:

```mjs
import { createServer, constants } from 'node:http2';
const { NGHTTP2_REFUSED_STREAM, NGHTTP2_CONNECT_ERROR } = constants;
import { connect } from 'node:net';

proxy.listen(8001);
```

```cjs
const http2 = require('node:http2');
const { NGHTTP2_REFUSED_STREAM } = http2.constants;
const net = require('node:net');

proxy.listen(8001);
```

An HTTP/2 CONNECT client:

```mjs
import { connect, constants } from 'node:http2';

const client = connect('http://localhost:8001');

// Must not specify the ':path' and ':scheme' headers
// for CONNECT requests or an error will be thrown.
const req = client.request({
  ':method': 'CONNECT',
  ':authority': 'localhost:8000',
});

req.on('response', (headers) => {
  console.log(headers[constants.HTTP2_HEADER_STATUS]);
});
let data = '';
req.setEncoding('utf8');
req.on('data', (chunk) => data += chunk);
req.on('end', () => {
  console.log(`The server says: ${data}`);
  client.close();
});
req.end('Jane');
```

```cjs
const http2 = require('node:http2');

const client = http2.connect('http://localhost:8001');

// Must not specify the ':path' and ':scheme' headers
// for CONNECT requests or an error will be thrown.
const req = client.request({
  ':method': 'CONNECT',
  ':authority': 'localhost:8000',
});

req.on('response', (headers) => {
  console.log(headers[http2.constants.HTTP2_HEADER_STATUS]);
});
let data = '';
req.setEncoding('utf8');
req.on('data', (chunk) => data += chunk);
req.on('end', () => {
  console.log(`The server says: ${data}`);
  client.close();
});
req.end('Jane');
```

### The extended `CONNECT` protocol

[RFC 8441][] defines an "Extended CONNECT Protocol" extension to HTTP/2 that
may be used to bootstrap the use of an `Http2Stream` using the `CONNECT`
method as a tunnel for other communication protocols (such as WebSockets).

The use of the Extended CONNECT Protocol is enabled by HTTP/2 servers by using
the `enableConnectProtocol` setting:

```mjs
import { createServer } from 'node:http2';
const settings = { enableConnectProtocol: true };
const server = createServer({ settings });
```

```cjs
const http2 = require('node:http2');
const settings = { enableConnectProtocol: true };
const server = http2.createServer({ settings });
```

Once the client receives the `SETTINGS` frame from the server indicating that
the extended CONNECT may be used, it may send `CONNECT` requests that use the
`':protocol'` HTTP/2 pseudo-header:

```mjs
import { connect } from 'node:http2';
const client = connect('http://localhost:8080');
client.on('remoteSettings', (settings) => {
  if (settings.enableConnectProtocol) {
    const req = client.request({ ':method': 'CONNECT', ':protocol': 'foo' });
    // ...
  }
});
```

```cjs
const http2 = require('node:http2');
const client = http2.connect('http://localhost:8080');
client.on('remoteSettings', (settings) => {
  if (settings.enableConnectProtocol) {
    const req = client.request({ ':method': 'CONNECT', ':protocol': 'foo' });
    // ...
  }
});
```

## Compatibility API

The Compatibility API has the goal of providing a similar developer experience
of HTTP/1 when using HTTP/2, making it possible to develop applications
that support both [HTTP/1][] and HTTP/2. This API targets only the
**public API** of the [HTTP/1][]. However many modules use internal
methods or state, and those _are not supported_ as it is a completely
different implementation.

The following example creates an HTTP/2 server using the compatibility
API:

```mjs
import { createServer } from 'node:http2';
const server = createServer((req, res) => {
  res.setHeader('Content-Type', 'text/html');
  res.setHeader('X-Foo', 'bar');
  res.writeHead(200, { 'Content-Type': 'text/plain; charset=utf-8' });
  res.end('ok');
});
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer((req, res) => {
  res.setHeader('Content-Type', 'text/html');
  res.setHeader('X-Foo', 'bar');
  res.writeHead(200, { 'Content-Type': 'text/plain; charset=utf-8' });
  res.end('ok');
});
```

In order to create a mixed [HTTPS][] and HTTP/2 server, refer to the
[ALPN negotiation][] section.
Upgrading from non-tls HTTP/1 servers is not supported.

The HTTP/2 compatibility API is composed of [`Http2ServerRequest`][] and
[`Http2ServerResponse`][]. They aim at API compatibility with HTTP/1, but
they do not hide the differences between the protocols. As an example,
the status message for HTTP codes is ignored.

### ALPN negotiation

ALPN negotiation allows supporting both [HTTPS][] and HTTP/2 over
the same socket. The `req` and `res` objects can be either HTTP/1 or
HTTP/2, and an application **must** restrict itself to the public API of
[HTTP/1][], and detect if it is possible to use the more advanced
features of HTTP/2.

The following example creates a server that supports both protocols:

```mjs
import { createSecureServer } from 'node:http2';
import { readFileSync } from 'node:fs';

const cert = readFileSync('./cert.pem');
const key = readFileSync('./key.pem');

const server = createSecureServer(
  { cert, key, allowHTTP1: true },
  onRequest,
).listen(8000);

```cjs
const { createSecureServer } = require('node:http2');
const { readFileSync } = require('node:fs');

const cert = readFileSync('./cert.pem');
const key = readFileSync('./key.pem');

const server = createSecureServer(
  { cert, key, allowHTTP1: true },
  onRequest,
).listen(4443);

The `'request'` event works identically on both [HTTPS][] and
HTTP/2.

### Class: `http2.Http2ServerRequest`

* Extends: {stream.Readable}

A `Http2ServerRequest` object is created by [`http2.Server`][] or
[`http2.SecureServer`][] and passed as the first argument to the
[`'request'`][] event. It may be used to access a request status, headers, and
data.

#### Event: `'aborted'`

The `'aborted'` event is emitted whenever a `Http2ServerRequest` instance is
abnormally aborted in mid-communication.

The `'aborted'` event will only be emitted if the `Http2ServerRequest` writable
side has not been ended.

#### Event: `'close'`

Indicates that the underlying [`Http2Stream`][] was closed.
Just like `'end'`, this event occurs only once per response.

#### `request.aborted`

* {boolean}

The `request.aborted` property will be `true` if the request has
been aborted.

#### `request.authority`

* {string}

The request authority pseudo header field. Because HTTP/2 allows requests
to set either `:authority` or `host`, this value is derived from
`req.headers[':authority']` if present. Otherwise, it is derived from
`req.headers['host']`.

#### `request.complete`

* {boolean}

The `request.complete` property will be `true` if the request has
been completed, aborted, or destroyed.

#### `request.connection`

> Stability: 0 - Deprecated. Use [`request.socket`][].

* {net.Socket|tls.TLSSocket}

See [`request.socket`][].

#### `request.destroy([error])`

* `error` {Error}

Calls `destroy()` on the [`Http2Stream`][] that received
the [`Http2ServerRequest`][]. If `error` is provided, an `'error'` event
is emitted and `error` is passed as an argument to any listeners on the event.

It does nothing if the stream was already destroyed.

#### `request.headers`

* {Object}

The request/response headers object.

Key-value pairs of header names and values. Header names are lower-cased.

```js
// Prints something like:
//
// { 'user-agent': 'curl/7.22.0',
//   host: '127.0.0.1:8000',
//   accept: '*/*' }
console.log(request.headers);
```

See [HTTP/2 Headers Object][].

In HTTP/2, the request path, host name, protocol, and method are represented as
special headers prefixed with the `:` character (e.g. `':path'`). These special
headers will be included in the `request.headers` object. Care must be taken not
to inadvertently modify these special headers or errors may occur. For instance,
removing all headers from the request will cause errors to occur:

```js
removeAllHeaders(request.headers);
assert(request.url);   // Fails because the :path header has been removed
```

#### `request.httpVersion`

* {string}

In case of server request, the HTTP version sent by the client. In the case of
client response, the HTTP version of the connected-to server. Returns
`'2.0'`.

Also `message.httpVersionMajor` is the first integer and
`message.httpVersionMinor` is the second.

#### `request.method`

* {string}

The request method as a string. Read-only. Examples: `'GET'`, `'DELETE'`.

#### `request.rawHeaders`

* {string\[]}

The raw request/response headers list exactly as they were received.

The keys and values are in the same list. It is _not_ a
list of tuples. So, the even-numbered offsets are key values, and the
odd-numbered offsets are the associated values.

Header names are not lowercased, and duplicates are not merged.

```js
// Prints something like:
//
// [ 'user-agent',
//   'this is invalid because there can be only one',
//   'User-Agent',
//   'curl/7.22.0',
//   'Host',
//   '127.0.0.1:8000',
//   'ACCEPT',
//   '*/*' ]
console.log(request.rawHeaders);
```

#### `request.rawTrailers`

* {string\[]}

The raw request/response trailer keys and values exactly as they were
received. Only populated at the `'end'` event.

#### `request.scheme`

* {string}

The request scheme pseudo header field indicating the scheme
portion of the target URL.

#### `request.setTimeout(msecs, callback)`

* `msecs` {number}
* `callback` {Function}
* Returns: {http2.Http2ServerRequest}

Sets the [`Http2Stream`][]'s timeout value to `msecs`. If a callback is
provided, then it is added as a listener on the `'timeout'` event on
the response object.

If no `'timeout'` listener is added to the request, the response, or
the server, then [`Http2Stream`][]s are destroyed when they time out. If a
handler is assigned to the request, the response, or the server's `'timeout'`
events, timed out sockets must be handled explicitly.

#### `request.socket`

* {net.Socket|tls.TLSSocket}

Returns a `Proxy` object that acts as a `net.Socket` (or `tls.TLSSocket`) but
applies getters, setters, and methods based on HTTP/2 logic.

`destroyed`, `readable`, and `writable` properties will be retrieved from and
set on `request.stream`.

`destroy`, `emit`, `end`, `on` and `once` methods will be called on
`request.stream`.

`setTimeout` method will be called on `request.stream.session`.

`pause`, `read`, `resume`, and `write` will throw an error with code
`ERR_HTTP2_NO_SOCKET_MANIPULATION`. See [`Http2Session` and Sockets][] for
more information.

All other interactions will be routed directly to the socket. With TLS support,
use [`request.socket.getPeerCertificate()`][] to obtain the client's
authentication details.

#### `request.stream`

* {Http2Stream}

The [`Http2Stream`][] object backing the request.

#### `request.trailers`

* {Object}

The request/response trailers object. Only populated at the `'end'` event.

#### `request.url`

* {string}

Request URL string. This contains only the URL that is present in the actual
HTTP request. If the request is:

```http
GET /status?name=ryan HTTP/1.1
Accept: text/plain
```

Then `request.url` will be:

```js
'/status?name=ryan'
```

To parse the url into its parts, `new URL()` can be used:

```console
$ node
> new URL('/status?name=ryan', 'http://example.com')
URL {
  href: 'http://example.com/status?name=ryan',
  origin: 'http://example.com',
  protocol: 'http:',
  username: '',
  password: '',
  host: 'example.com',
  hostname: 'example.com',
  port: '',
  pathname: '/status',
  search: '?name=ryan',
  searchParams: URLSearchParams { 'name' => 'ryan' },
  hash: ''
}
```

### Class: `http2.Http2ServerResponse`

* Extends: {Stream}

This object is created internally by an HTTP server, not by the user. It is
passed as the second parameter to the [`'request'`][] event.

#### Event: `'close'`

Indicates that the underlying [`Http2Stream`][] was terminated before
[`response.end()`][] was called or able to flush.

#### Event: `'finish'`

Emitted when the response has been sent. More specifically, this event is
emitted when the last segment of the response headers and body have been
handed off to the HTTP/2 multiplexing for transmission over the network. It
does not imply that the client has received anything yet.

After this event, no more events will be emitted on the response object.

#### `response.addTrailers(headers)`

* `headers` {Object}

This method adds HTTP trailing headers (a header but at the end of the
message) to the response.

Attempting to set a header field name or value that contains invalid characters
will result in a [`TypeError`][] being thrown.

#### `response.appendHeader(name, value)`

* `name` {string}
* `value` {string|string\[]}

Append a single header value to the header object.

If the value is an array, this is equivalent to calling this method multiple
times.

If there were no previous values for the header, this is equivalent to calling
[`response.setHeader()`][].

Attempting to set a header field name or value that contains invalid characters
will result in a [`TypeError`][] being thrown.

```js
// Returns headers including "set-cookie: a" and "set-cookie: b"
const server = http2.createServer((req, res) => {
  res.setHeader('set-cookie', 'a');
  res.appendHeader('set-cookie', 'b');
  res.writeHead(200);
  res.end('ok');
});
```

#### `response.connection`

> Stability: 0 - Deprecated. Use [`response.socket`][].

* {net.Socket|tls.TLSSocket}

See [`response.socket`][].

#### `response.createPushResponse(headers, callback)`

* `headers` {HTTP/2 Headers Object} An object describing the headers
* `callback` {Function} Called once `http2stream.pushStream()` is finished,
  or either when the attempt to create the pushed `Http2Stream` has failed or
  has been rejected, or the state of `Http2ServerRequest` is closed prior to
  calling the `http2stream.pushStream()` method
  * `err` {Error}
  * `res` {http2.Http2ServerResponse} The newly-created `Http2ServerResponse`
    object

Call [`http2stream.pushStream()`][] with the given headers, and wrap the
given [`Http2Stream`][] on a newly created `Http2ServerResponse` as the callback
parameter if successful. When `Http2ServerRequest` is closed, the callback is
called with an error `ERR_HTTP2_INVALID_STREAM`.

#### `response.end([data[, encoding]][, callback])`

* `data` {string|Buffer|Uint8Array}
* `encoding` {string}
* `callback` {Function}
* Returns: {this}

This method signals to the server that all of the response headers and body
have been sent; that server should consider this message complete.
The method, `response.end()`, MUST be called on each response.

If `data` is specified, it is equivalent to calling
[`response.write(data, encoding)`][] followed by `response.end(callback)`.

If `callback` is specified, it will be called when the response stream
is finished.

#### `response.finished`

> Stability: 0 - Deprecated. Use [`response.writableEnded`][].

* {boolean}

Boolean value that indicates whether the response has completed. Starts
as `false`. After [`response.end()`][] executes, the value will be `true`.

#### `response.getHeader(name)`

* `name` {string}
* Returns: {string}

Reads out a header that has already been queued but not sent to the client.
The name is case-insensitive.

```js
const contentType = response.getHeader('content-type');
```

#### `response.getHeaderNames()`

* Returns: {string\[]}

Returns an array containing the unique names of the current outgoing headers.
All header names are lowercase.

```js
response.setHeader('Foo', 'bar');
response.setHeader('Set-Cookie', ['foo=bar', 'bar=baz']);

const headerNames = response.getHeaderNames();
// headerNames === ['foo', 'set-cookie']
```

#### `response.getHeaders()`

* Returns: {Object}

Returns a shallow copy of the current outgoing headers. Since a shallow copy
is used, array values may be mutated without additional calls to various
header-related http module methods. The keys of the returned object are the
header names and the values are the respective header values. All header names
are lowercase.

The object returned by the `response.getHeaders()` method _does not_
prototypically inherit from the JavaScript `Object`. This means that typical
`Object` methods such as `obj.toString()`, `obj.hasOwnProperty()`, and others
are not defined and _will not work_.

```js
response.setHeader('Foo', 'bar');
response.setHeader('Set-Cookie', ['foo=bar', 'bar=baz']);

const headers = response.getHeaders();
// headers === { foo: 'bar', 'set-cookie': ['foo=bar', 'bar=baz'] }
```

#### `response.hasHeader(name)`

* `name` {string}
* Returns: {boolean}

Returns `true` if the header identified by `name` is currently set in the
outgoing headers. The header name matching is case-insensitive.

```js
const hasContentType = response.hasHeader('content-type');
```

#### `response.headersSent`

* {boolean}

True if headers were sent, false otherwise (read-only).

#### `response.removeHeader(name)`

* `name` {string}

Removes a header that has been queued for implicit sending.

```js
response.removeHeader('Content-Encoding');
```

#### `response.req`

* {http2.Http2ServerRequest}

A reference to the original HTTP2 `request` object.

#### `response.sendDate`

* {boolean}

When true, the Date header will be automatically generated and sent in
the response if it is not already present in the headers. Defaults to true.

This should only be disabled for testing; HTTP requires the Date header
in responses.

#### `response.setHeader(name, value)`

* `name` {string}
* `value` {string|string\[]}

Sets a single header value for implicit headers. If this header already exists
in the to-be-sent headers, its value will be replaced. Use an array of strings
here to send multiple headers with the same name.

```js
response.setHeader('Content-Type', 'text/html; charset=utf-8');
```

```js
response.setHeader('Set-Cookie', ['type=ninja', 'language=javascript']);
```

Attempting to set a header field name or value that contains invalid characters
will result in a [`TypeError`][] being thrown.

When headers have been set with [`response.setHeader()`][], they will be merged
with any headers passed to [`response.writeHead()`][], with the headers passed
to [`response.writeHead()`][] given precedence.

```js
// Returns content-type = text/plain
const server = http2.createServer((req, res) => {
  res.setHeader('Content-Type', 'text/html; charset=utf-8');
  res.setHeader('X-Foo', 'bar');
  res.writeHead(200, { 'Content-Type': 'text/plain; charset=utf-8' });
  res.end('ok');
});
```

#### `response.setTimeout(msecs[, callback])`

* `msecs` {number}
* `callback` {Function}
* Returns: {http2.Http2ServerResponse}

Sets the [`Http2Stream`][]'s timeout value to `msecs`. If a callback is
provided, then it is added as a listener on the `'timeout'` event on
the response object.

#### `response.socket`

* {net.Socket|tls.TLSSocket}

Returns a `Proxy` object that acts as a `net.Socket` (or `tls.TLSSocket`) but
applies getters, setters, and methods based on HTTP/2 logic.

`destroyed`, `readable`, and `writable` properties will be retrieved from and
set on `response.stream`.

`destroy`, `emit`, `end`, `on` and `once` methods will be called on
`response.stream`.

`setTimeout` method will be called on `response.stream.session`.

`pause`, `read`, `resume`, and `write` will throw an error with code
`ERR_HTTP2_NO_SOCKET_MANIPULATION`. See [`Http2Session` and Sockets][] for
more information.

All other interactions will be routed directly to the socket.

```mjs
import { createServer } from 'node:http2';
const server = createServer((req, res) => {
  const ip = req.socket.remoteAddress;
  const port = req.socket.remotePort;
  res.end(`Your IP address is ${ip} and your source port is ${port}.`);
}).listen(3000);
```

```cjs
const http2 = require('node:http2');
const server = http2.createServer((req, res) => {
  const ip = req.socket.remoteAddress;
  const port = req.socket.remotePort;
  res.end(`Your IP address is ${ip} and your source port is ${port}.`);
}).listen(3000);
```

#### `response.statusCode`

* {number}

When using implicit headers (not calling [`response.writeHead()`][] explicitly),
this property controls the status code that will be sent to the client when
the headers get flushed.

```js
response.statusCode = 404;
```

After response header was sent to the client, this property indicates the
status code which was sent out.

#### `response.statusMessage`

* {string}

Status message is not supported by HTTP/2 (RFC 7540 8.1.2.4). It returns
an empty string.

#### `response.stream`

* {Http2Stream}

The [`Http2Stream`][] object backing the response.

#### `response.writableEnded`

* {boolean}

Is `true` after [`response.end()`][] has been called. This property
does not indicate whether the data has been flushed, for this use
[`writable.writableFinished`][] instead.

#### `response.write(chunk[, encoding][, callback])`

* `chunk` {string|Buffer|Uint8Array}
* `encoding` {string}
* `callback` {Function}
* Returns: {boolean}

If this method is called and [`response.writeHead()`][] has not been called,
it will switch to implicit header mode and flush the implicit headers.

This sends a chunk of the response body. This method may
be called multiple times to provide successive parts of the body.

In the `node:http` module, the response body is omitted when the
request is a HEAD request. Similarly, the `204` and `304` responses
_must not_ include a message body.

`chunk` can be a string or a buffer. If `chunk` is a string,
the second parameter specifies how to encode it into a byte stream.
By default the `encoding` is `'utf8'`. `callback` will be called when this chunk
of data is flushed.

This is the raw HTTP body and has nothing to do with higher-level multi-part
body encodings that may be used.

The first time [`response.write()`][] is called, it will send the buffered
header information and the first chunk of the body to the client. The second
time [`response.write()`][] is called, Node.js assumes data will be streamed,
and sends the new data separately. That is, the response is buffered up to the
first chunk of the body.

Returns `true` if the entire data was flushed successfully to the kernel
buffer. Returns `false` if all or part of the data was queued in user memory.
`'drain'` will be emitted when the buffer is free again.

#### `response.writeContinue()`

Sends a status `100 Continue` to the client, indicating that the request body
should be sent. See the [`'checkContinue'`][] event on `Http2Server` and
`Http2SecureServer`.

#### `response.writeEarlyHints(hints)`

* `hints` {Object}

Sends a status `103 Early Hints` to the client with a Link header,
indicating that the user agent can preload/preconnect the linked resources.
The `hints` is an object containing the values of headers to be sent with
early hints message.

**Example**

```js
const earlyHintsLink = '</styles.css>; rel=preload; as=style';
response.writeEarlyHints({
  'link': earlyHintsLink,
});

const earlyHintsLinks = [
  '</styles.css>; rel=preload; as=style',
  '</scripts.js>; rel=preload; as=script',
];
response.writeEarlyHints({
  'link': earlyHintsLinks,
});
```

#### `response.writeHead(statusCode[, statusMessage][, headers])`

* `statusCode` {number}
* `statusMessage` {string}
* `headers` {Object|Array}
* Returns: {http2.Http2ServerResponse}

Sends a response header to the request. The status code is a 3-digit HTTP
status code, like `404`. The last argument, `headers`, are the response headers.

Returns a reference to the `Http2ServerResponse`, so that calls can be chained.

For compatibility with [HTTP/1][], a human-readable `statusMessage` may be
passed as the second argument. However, because the `statusMessage` has no
meaning within HTTP/2, the argument will have no effect and a process warning
will be emitted.

```js
const body = 'hello world';
response.writeHead(200, {
  'Content-Length': Buffer.byteLength(body),
  'Content-Type': 'text/plain; charset=utf-8',
});
```

`Content-Length` is given in bytes not characters. The
`Buffer.byteLength()` API may be used to determine the number of bytes in a
given encoding. On outbound messages, Node.js does not check if Content-Length
and the length of the body being transmitted are equal or not. However, when
receiving messages, Node.js will automatically reject messages when the
`Content-Length` does not match the actual payload size.

This method may be called at most one time on a message before
[`response.end()`][] is called.

If [`response.write()`][] or [`response.end()`][] are called before calling
this, the implicit/mutable headers will be calculated and call this function.

Attempting to set a header field name or value that contains invalid characters
will result in a [`TypeError`][] being thrown.

## Collecting HTTP/2 performance metrics

The [Performance Observer][] API can be used to collect basic performance
metrics for each `Http2Session` and `Http2Stream` instance.

```mjs
import { PerformanceObserver } from 'node:perf_hooks';

```cjs
const { PerformanceObserver } = require('node:perf_hooks');

The `entryType` property of the `PerformanceEntry` will be equal to `'http2'`.

The `name` property of the `PerformanceEntry` will be equal to either
`'Http2Stream'` or `'Http2Session'`.

If `name` is equal to `Http2Stream`, the `PerformanceEntry` will contain the
following additional properties:

* `bytesRead` {number} The number of `DATA` frame bytes received for this
  `Http2Stream`.
* `bytesWritten` {number} The number of `DATA` frame bytes sent for this
  `Http2Stream`.
* `id` {number} The identifier of the associated `Http2Stream`
* `timeToFirstByte` {number} The number of milliseconds elapsed between the
  `PerformanceEntry` `startTime` and the reception of the first `DATA` frame.
* `timeToFirstByteSent` {number} The number of milliseconds elapsed between
  the `PerformanceEntry` `startTime` and sending of the first `DATA` frame.
* `timeToFirstHeader` {number} The number of milliseconds elapsed between the
  `PerformanceEntry` `startTime` and the reception of the first header.

If `name` is equal to `Http2Session`, the `PerformanceEntry` will contain the
following additional properties:

* `bytesRead` {number} The number of bytes received for this `Http2Session`.
* `bytesWritten` {number} The number of bytes sent for this `Http2Session`.
* `framesReceived` {number} The number of HTTP/2 frames received by the
  `Http2Session`.
* `framesSent` {number} The number of HTTP/2 frames sent by the `Http2Session`.
* `maxConcurrentStreams` {number} The maximum number of streams concurrently
  open during the lifetime of the `Http2Session`.
* `pingRTT` {number} The number of milliseconds elapsed since the transmission
  of a `PING` frame and the reception of its acknowledgment. Only present if
  a `PING` frame has been sent on the `Http2Session`.
* `streamAverageDuration` {number} The average duration (in milliseconds) for
  all `Http2Stream` instances.
* `streamCount` {number} The number of `Http2Stream` instances processed by
  the `Http2Session`.
* `type` {string} Either `'server'` or `'client'` to identify the type of
  `Http2Session`.

## Note on `:authority` and `host`

HTTP/2 requires requests to have either the `:authority` pseudo-header
or the `host` header. Prefer `:authority` when constructing an HTTP/2
request directly, and `host` when converting from HTTP/1 (in proxies,
for instance).

The compatibility API falls back to `host` if `:authority` is not
present. See [`request.authority`][] for more information. However,
if you don't use the compatibility API (or use `req.headers` directly),
you need to implement any fall-back behavior yourself.

[ALPN Protocol ID]: https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml#alpn-protocol-ids
[ALPN negotiation]: #alpn-negotiation
[Compatibility API]: #compatibility-api
[HTTP/1]: http.md
[HTTP/2]: https://tools.ietf.org/html/rfc7540
[HTTP/2 Headers Object]: #headers-object
[HTTP/2 Settings Object]: #settings-object
[HTTP/2 Unencrypted]: https://http2.github.io/faq/#does-http2-require-encryption
[HTTPS]: https.md
[Performance Observer]: perf_hooks.md
[RFC 7838]: https://tools.ietf.org/html/rfc7838
[RFC 8336]: https://tools.ietf.org/html/rfc8336
[RFC 8441]: https://tools.ietf.org/html/rfc8441
[RFC 9113]: https://datatracker.ietf.org/doc/html/rfc9113#section-5.3.1
[Sensitive headers]: #sensitive-headers
[`'checkContinue'`]: #event-checkcontinue
[`'connect'`]: #event-connect
[`'request'`]: #event-request
[`'unknownProtocol'`]: #event-unknownprotocol
[`ClientHttp2Stream`]: #class-clienthttp2stream
[`Duplex`]: stream.md#class-streamduplex
[`Http2ServerRequest`]: #class-http2http2serverrequest
[`Http2ServerResponse`]: #class-http2http2serverresponse
[`Http2Session` and Sockets]: #http2session-and-sockets
[`Http2Session`'s `'stream'` event]: #event-stream
[`Http2Stream`]: #class-http2stream
[`ServerHttp2Stream`]: #class-serverhttp2stream
[`TypeError`]: errors.md#class-typeerror
[`http2.SecureServer`]: #class-http2secureserver
[`http2.Server`]: #class-http2server
[`http2.createSecureServer()`]: #http2createsecureserveroptions-onrequesthandler
[`http2.createServer()`]: #http2createserveroptions-onrequesthandler
[`http2session.close()`]: #http2sessionclosecallback
[`http2stream.pushStream()`]: #http2streampushstreamheaders-options-callback
[`import()`]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Operators/import
[`net.Server.close()`]: net.md#serverclosecallback
[`net.Socket.bufferSize`]: net.md#socketbuffersize
[`net.Socket.prototype.ref()`]: net.md#socketref
[`net.Socket.prototype.unref()`]: net.md#socketunref
[`net.Socket`]: net.md#class-netsocket
[`net.connect()`]: net.md#netconnect
[`net.createServer()`]: net.md#netcreateserveroptions-connectionlistener
[`request.authority`]: #requestauthority
[`request.maxHeadersCount`]: http.md#requestmaxheaderscount
[`request.socket.getPeerCertificate()`]: tls.md#tlssocketgetpeercertificatedetailed
[`request.socket`]: #requestsocket
[`response.end()`]: #responseenddata-encoding-callback
[`response.setHeader()`]: #responsesetheadername-value
[`response.socket`]: #responsesocket
[`response.writableEnded`]: #responsewritableended
[`response.write()`]: #responsewritechunk-encoding-callback
[`response.write(data, encoding)`]: http.md#responsewritechunk-encoding-callback
[`response.writeContinue()`]: #responsewritecontinue
[`response.writeHead()`]: #responsewriteheadstatuscode-statusmessage-headers
[`server.close()`]: #serverclosecallback
[`server.maxHeadersCount`]: http.md#servermaxheaderscount
[`tls.Server.close()`]: tls.md#serverclosecallback
[`tls.TLSSocket`]: tls.md#class-tlstlssocket
[`tls.connect()`]: tls.md#tlsconnectoptions-callback
[`tls.createServer()`]: tls.md#tlscreateserveroptions-secureconnectionlistener
[`writable.writableFinished`]: stream.md#writablewritablefinished
[error code]: #error-codes-for-rst_stream-and-goaway